SAM #N0010426QAB82

Procurement of Self-Locking Screws and Replacement Parts for NAVSUP WSS Mechanicsburg

NAVSUP Weapon Systems Support Mechanicsburg, part of the Department of the Navy, is seeking manufacturers for self-locking screws and similar replacement parts. - Government Buyer: - NAVSUP Weapon Systems Support Mechanicsburg (Department of the Navy, Department of Defense) - Products Requested: - SCREW, SELF-LOCKING - Part number: NAS1351-12LN28P (cage 80205) - SCREW, CAP - Part number: NAS1352-6LE12P (cage 80205) - Requirements: - Items must meet specified material and physical standards - Marking in accordance with MIL-STD-130, MIL-STD-1285, MIL-STD-454, MIL-P-15024/5 - Quality assurance and configuration control procedures - Government source inspection required - Packaging must comply with MIL-STD 2073 - OEMs: - No specific OEMs named; part numbers and cage code 80205 referenced - Notable Details: - Compliance with military standards and government inspection - No purchase quantities specified in the notice

Description

CONTACT INFORMATION 4 N97113 FA 771-229-0460 amanda.r.hayward.civ@us.navy.mil ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023) 19 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996) 2 STOP-WORK ORDER (AUG 1989) 1 GENERAL INFORMATION-FOB-DESTINATION 1 B WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) 16 Invoice and Receiving Report (Combo) Inspection / Acceptance Point: Source TBD N00104 TBD TBD SEE SCHEDULE TBD N/A N/A TBD N/A N/A N/A N/A navsupwawf.wss.ftc@navy.mil NOTE FOR CONTRACTOR/ADMINISTRATIVE CONTRACTING OFFICER 3 NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18) 1 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026) 4 NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025) 1 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026) 1 SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026) 7 SMALL BUSINESS PROGRAM REPRESENTATIONS (DEV 2026-O0037)(FEB 2026) 20 332722 600 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026) 13 CERTIFICATION REGARDING KNOWLEDGE OF CHILD LABOR FOR LISTED END PRODUCTS(FEB 2021) 4 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENERGY PROGRAM USE (APRIL 2008) 2 X NOTE: AWARD WILL BE BASED ON TOTAL FOR BOTH NIINS, NOT BY INDIVIDUAL NIINS.GOVERNMENT SOURCE INSPECTION per FAR 52.246-2 IS REQUIRED.DELIVERY 90 DAYS. All contractual documents (i.e., contracts, purchase orders, task orders, delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture of the SCREW, SELF-LOCKING. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS 3.1 Manufacturing and Design - The SCREW, SELF-LOCKING furnished under this contract/purchase order shall meet the material and physical requirements as specified; p/n NAS1351-12LN28P cage 80205. 3.2 Marking - Unless marking requirements are specified by a document or drawing cited in this solicitation, all items delivered under this contract/purchase order shall be marked and identified in accordance with the applicable Military Standards and Specifications as follows: Mechanical Parts, Assemblies, and Equipment - MIL-STD-130 Electrical and Electronic Parts - MIL-STD-1285, Method 1 Electrical and Electronic Parts and Assemblies not covered by MIL-STD-1285 - use MIL-STD-130 Electronic Equipment - MIL-STD-454 Requirement Number 67 Electrical Equipment - MIL-P-15024/5 (SHIPS) 3.3 Configuration Control MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg, PA 17055-0788.) 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. The Contractor may use his own or any other facilities suitable for the performance of the inspection requirements, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, nor does it commit the Government to acceptance of defective material. 4.3 Records Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of the contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing, and Marking Preservation, Packaging, Packing, and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE. 6. NOTES 6.1 Ordering Information for Document References The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e., Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. If you have a problem connecting to the DODSSP Website, please contact either the Subscription Service Desk (215) 697-2569, or the Special Assistance Desk (215) 697-2667. The DODSSP Customer Service Staff is available every business day between 7:30 AM and 4:00 PM Eastern Time to answer questions or assist in solving problems when ordering from the DODSSP collection of Defense specifications and standards, Federal specifications and standards used by DOD, and other DOD standardization documents. Mail requests should be submitted to: Navy Publishing and Printing Service (Subscriptions) Building 4D 700 Robbins Ave. Philadelphia, PA 19111 Attn: DODSSP Requests can be transmitted via FAX to (215) 697-1462. Additional Links: See Solicitation N0010426QAB82

View original listing