SAM #N0010426QAB86

NAVSUP Solicitation for Manufacture of Discharger and ESD Ground Cords

This opportunity from the Naval Supply Systems Command (NAVSUP) Weapon Systems Support Mechanicsburg seeks small business manufacturers for a specialized Discharger. - Government Buyer: - Department of the Navy, Department of Defense - Naval Supply Systems Command (NAVSUP) Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - Products Requested: - Discharger, part number 42465, design cage code 1MH97 - Must meet all specified material and physical requirements - Requires compliance with military marking and identification standards (MIL-STD-130, MIL-STD-1285, MIL-STD-454, MIL-P-15024/5) - ESD mat ground cords (for use with Discharger): - ESD Systems ground cord, part number 13165 - DESCO ground cord, part numbers 09821 (10 FT) and 09826 (15 FT) - OEMs and Vendors: - ESD Systems (ground cord) - DESCO (ground cord) - Notable Requirements: - Small business set-aside - Government source inspection required - All items must comply with applicable military standards for marking and identification - Place of Performance/Delivery: - NAVSUP Weapon Systems Support Mechanicsburg, Mechanicsburg, PA

Description

CONTACT INFORMATION 4 N9743C FCA 771-229-4487 drew.m.fink.civ@us.navy.mil ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023) 19 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996) 2 STOP-WORK ORDER (AUG 1989) 1 GENERAL INFORMATION-FOB-DESTINATION 1 B WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) 16 Invoice and Receiving Report (Combo) Inspection / Acceptance Point - Source TBD N00104 TBD TBD SEE SCHEDULE TBD N/A N/A TBD N/A N/A N/A N/A navsupwawf.wss.ftc@navy.mil NOTE FOR CONTRACTOR/ADMINISTRATIVE CONTRACTING OFFICER 3 NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18) 1 NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025) 1 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026) 1 SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026) 7 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026) 13 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENERGY PROGRAM USE (APRIL 2008) 2 X GOVERNMENT SOURCE INSPECTION per FAR 52.246-2 IS REQUIRED. DELIVERY_______________DAYS. All contractual documents (i.e., contracts, purchase orders, task orders, delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as SCOPE 1.1 This contract/purchase order contains the requirements for manufacture of the DISCHARGER. APPLICABLE DOCUMENTS - NOT APPLICABLE REQUIREMENTS 3.1 Manufacturing and Design - The DISCHARGER, furnished under this contract/purchase order shall meet the material and physical requirements as specified; P/N: 42465 (Design Cage: 1MH97). 3.2 Marking - Unless marking requirements are specified by a document or drawing cited in this solicitation, all items delivered under this contract/purchase order shall be marked and identified in accordance with the applicable Military Standards and Specifications as follows: Mechanical Parts, Assemblies, and Equipment - MIL-STD-130 Electrical and Electronic Parts - MIL-STD-1285, Method 1 Electrical and Electronic Parts and Assemblies not covered by MIL-STD-1285 - use MIL-STD-130 Electronic Equipment - MIL-STD-454 Requirement Number 67 Electrical Equipment - MIL-P-15024/5 (SHIPS) 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the SPCC Contracting Officer has been notified and approval has been given by issuance of a written change order. When any change in design, material, servicing, or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, or a detailed description of the change, explaining the reason therefore. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE/MINOR DESIGN CHANGE - If the Manufacturer's Part Number or item design indicated thereon has changed, but form, fit, and function of the item is not affected thereby, and the design change meets the criteria for minor, by not affecting form, fit, function, reliability, or safety, supply the item and advise SPCC immediately of the new part number, furnishing a detail drawing and/or a detailed description of the change, as applicable. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, nor does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing, and Marking - Preservation, Packaging, Packing, and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e., Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards, and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions, such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices, and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (e.g., NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (e.g., NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH. P/N: 42465 (Design Cage: 1MH97) REQUIREMENTS FOR ESD MAT: Must be in the static dissipative range (105-1012 ohms/square). Must have capability for soft grounding by utilizing a series resistor of 1 megohm +/-10% in the ground wire. Must have receptacle for wrist strap attachment. ACCEPTABLE GROUND CORD: ESD SYSTEMS, ground cord P/N 13165 (one megohm resistor to mat - gray wire) or DESCO, ground cord P/N 09821 (10 FT wire) or 09826 (15 FT wire) for the one megohm resistor. Additional Links: See Solicitation N0010426QAB86

View original listing