SAM #PANRSA-26-P0000-036514

RFI: ISO/IEC 17025 Calibration for Fluke 792A AC to DC Voltage Transfer Standard

This opportunity seeks vendors capable of providing high-precision calibration services for a Fluke 792A AC to DC Voltage Transfer Standard for the U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA). - The requirement is for ISO/IEC 17025 accredited calibration and/or repair services for one (1) Fluke 792A unit - Calibration must achieve uncertainties superior to those provided by the OEM (Fluke) - The calibrated unit will serve as a 'Gold Standard' for calibrating other Fluke 792As - The Fluke 792A (BC: ASA286, SN: 9285001) may be sent to third-party vendors such as PTB Germany or NRC Calibration for enhanced calibration - Vendors must demonstrate ISO/IEC 17025 accreditation and capability to deliver better-than-OEM calibration uncertainties - The government will ship the unit from Redstone Arsenal, AL; calibration is to be performed at the contractor's facility - NAICS code: 811210 (Electronic and Precision Equipment Repair and Maintenance); PSC: J066 - This is a Request for Information (RFI) for market research, not a solicitation or award - No specific period of performance is provided; details may be in Section B of the contract - Estimated contract value is likely low, as only one unit is involved - Place of performance includes Redstone Arsenal, AL (government facility) and the contractor's calibration facility

Description

                                                                              Request for Information THIS IS A REQUEST FOR INFORMATION (RFI) ONLY – This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. Solicitations are not available at this time. Requests for a solicitation will not receive a response. This notice does not constitute a commitment by the United States Government to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the United States Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the United States Government. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. If a solicitation is released, it will be synopsized on SAM.GOV. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. 1.Agency: U.S. Army Contracting Command-Redstone Arsenal in support of the U.S Army Test, Measurement, and Diagnostic Equipment Activity (USATA) is conducting market research to obtain capability information in support of U.S. Army Test, Measurement, and Diagnostic Equipment Activity(USATA) in accordance with FAR 15.201(e).2.Contracting Office Address: N/A3.Notice Type: Special Notice4.Reference Number: PANRSA-26-P0000-0365145.Title: Fluke 792A AC to DC Voltage Transfer Standard6.Classification Code: J066 Maintenance, Repair, and Rebuilding of Equipment - Instruments and Laboratory Equipment7.NAICS Code: 811210 Electronic and Precision Equipment Repair and Maintenance8.Response Date: Wednesday June 10, 2026, 3:00pm Eastern Time9.Primary Points of Contact: Contracting Officer: Portia R. Sampson, portia.r.sampson.civ@army.mil & Contract Specialist: Samantha Shirley, samantha.c.shirley.civ@army.mil10.Description: The US Army Contracting Command-Redstone Arsenal, Redstone Services and IT Solutions Branch plans to obtain information to serve as market research to help identify potential sources for accredited calibration and/or repair services (C&RS) on a quantity of one (1) Fluke 792A AC to DC Voltage transfer standard (1) for ISO/IEC 17025 accredited calibration. This Fluke 792A needs to be calibrated with better uncertainties than the manufacturer, Fluke, can provide so it can be used as a“Gold Standard” to calibrate other Fluke 792As. The Fluke 792As shall be delivered to 3rd party vendors (PTB Germany & NRC Calibration) for a better uncertainty level of calibration numbers that can be produced by a few vendors. The list of the items is as follows:•Fluke 792A AC to DC Voltage transfer standard (BC: ASA286 & SN: 9285001) This RFI will utilize NAICS Code 811210. 11.Place of Contract Performance: Vendor Facility 12.Set Aside: TBD 13.Responses: Interested parties are requested to respond to this RFI with the following: 1.Identify full company name. 2.Identify business size. 3.Identify Socio-economic status, as applicable. 4.Include Point of Contacts (POCs): name, position, office and mobile telephone numbers, andemail address. 5.Identify Cage Code. 6.Identify Unique Entity Identifier (UEI). The response date for this market research is Wednesday June 10, 2026, 3:00pm Eastern Time No phone calls will be accepted. All responses to this RFI may be submitted via e-mail to the following POCs: •Contracting Officer: Portia R. Sampson, portia.r.sampson.civ@army.mil, and •Contract Specialist: Samantha Shirley, samantha.c.shirley.civ@army.mil.

View original listing