SAM #W911S226U3333

Army Solicitation for CET Skid Attack Pac and Installation on Ford F550

The Department of the Army, through the Mission Installation Contracting Command (MICC) at Fort Drum, is seeking to procure a specialized firefighting skid unit for a Ford F550 vehicle. - Government Buyer: - Department of Defense, Department of the Army - Mission Installation Contracting Command (MICC), Fort Drum - OEMs and Vendors: - CET (fire pump manufacturer) - Kohler (engine manufacturer) - Ford (vehicle platform) - Hannay (booster reel manufacturer) - Products/Services Requested: - CET Skid Attack Pac for Ford F550 - 200-gallon water tank (1/2 inch polypropylene) - CET DI PFP 20hp KHL MR single-stage centrifugal fire pump - Kohler 20 HP V Twin engine with electric start - Hannay 12V electric rewind booster reel with 100 feet of 1-inch rubber booster hose - Integrated plumbing and manifold systems - Installation on Ford F550 - Delivery, removal of existing skid unit, and installation of new unit at Fort Hood, TX - Unique/Notable Requirements: - All components must be compatible with Ford F550 - Price must include delivery to Fort Hood, TX (ZIP 76544), removal of old unit, and installation of new unit - Installation must be performed at the end user location - Detailed technical specifications for tank, pump, engine, and reel - Place of Performance: - Fort Hood, Texas (delivery and installation site) - MICC Fort Drum, New York (contracting office)

Description

2026 or 2027 new unit, CET Skid Attack Pac for Ford F550. WATER TANK - Capacity: 200 U.S. gallons, 1/2in polypropylene with Polymar Co PP resin, Heavy duty extruded weld joints, Fully baffled to NFPA standards, Integrated transverse and longitudinal partitions, Sight Gauge: 3in wide, 70% transparent (passenger side rear wall), Fill Tower: 8in x 8in x 8in hinged cover with internal vent/overflow, 1in drain with brass plug. SKID BASE - Dimensions: 48in wide � 96in long, Pump Deck Extension: 34in rearward extension, Material: 3/4in PT2E polypropylene, Reinforcement:1/2in polypropylene gussets (15in � 32in), Features: Integrated lifting holes, direct truck bed mounting. FIRE PUMP - Model: CET DI PFP 20hp KHL MR, Type: Single stage centrifugal, Performance: 265 GPM @ 50 PSI, 190 GPM @ 100 PSI, 115 GPM @ 150PSI, 45 GPM @ 200 PSI, Construction: Aluminum alloy volute and pump head, Bronze enclosed impeller, Mechanical self lubricating shaft seal, Priming: Exhaust venturi primer(15?20ft lift capability). PUMP ENGINE - Kohler 20 HP V Twin, Air cooled, 12V electric start with recoil backup, 3 gallon remote mounted tank, Weather proof quick disconnect harness. CONTROLS - Master switch, Key start, 2-1/2in discharge pressure gauge, Lighted control panel. PLUMBING AND MANIFOLD SYSTEM - Suction Side: Tank to Pump Line: 2-1/2in NPT, Valve: 2-1/2in industrial valve (remains open for tank operations);Overboard Suction: 2-1/2in NST male adapter, 2-1/2in NSTF cap with retaining cable; Construction: Schedule 40 steel piping, pressure tested to 400 PSI; Discharge Side: Manifold: 2in � 2in welded steel manifold, Galvanized and painted red; Rear Discharges: 1-1/2in fire grade drop out valve (with cap and chain), 3/4in GHT discharge (with cap and chain); Side Discharges: Two 1in NPT outlets, Two 1-1/2in NPT outlets. BOOSTER REEL- Type: Hannay 12V electric rewind; Capacity: 100 ft of 1in rubber booster hose; Features: Push button rewind, Manual crank backup, 1in NPT swivel inlet, 1in NST outlet riser, 100ft of 1in NST rubber booster hose to be included. WEIGHT AND DIMENSIONS: Dry Weight: 723lbs, Wet Weight: 2,855lbs; Overall Length: 96in skid base + 34in pump deck extension; Overall Width: 48in. DELIVERY AND INSTALLATION - Final price shall include delivery to 76544, the removal of existing skid attack pac from a Ford F550, and the installation of the new skid attack pac using local installation service to end user location at 76544 Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3333Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing