PIEE #W911KB26RA039

Life Safety Repairs and Upgrades for Hangar 1, Fort Wainwright, Alaska

This opportunity seeks a small business contractor for comprehensive life safety repairs at Hangar 1, Fort Wainwright, Alaska, managed by the U.S. Army Corps of Engineers, Alaska District. - Government Buyer: - U.S. Army Corps of Engineers, Alaska District (W2SN ENDIST ALASKA Contracting Office KO) - Scope of Work: - Design-build project for Hangar 1 (B1557) at Fort Wainwright - Install electrical power on the southeast side of Hangar 1 to support the Black Hawk Aircrew Trainer (BAT) and Transportable Flight Procedure Simulator (TFPS), including their ECU units - Electrical requirements: two 120/208v, 200 amp, 60Hz, three phase, 4 wire plus ground services - Use of MS980555C52412S or MS90555C52143S receptacles for each device - Connect simulators to the fire alarm and mass notification system - Convert bay areas to a wet pipe sprinkler system - Correct egress deficiencies and install code-required emergency lighting - Install expanded metal mesh in a prefab arms vault to comply with AR190-11 Tab G for use as an Arms Room - Update fire system as needed to meet current building codes - Perform architectural repairs (fire stopping, fire doors, miscellaneous, tower, catwalk, stair vestibule, simulator area modifications) - Unique/Notable Requirements: - Building is designated as historical; coordination with the State Historic Preservation Office (SHPO) is required for compliance - Compliance with the Buy American Act and federal safety regulations - Total small business set-aside; firm fixed-price contract - Construction cost limitation: $18,000,000 - Performance period: 600 calendar days - No specific OEMs or vendors are named in the solicitation.

Description

This is a solicitation notice for a total small business set aside design build Request for Proposal (RFP) to install power on the southeast of Hangar 1 to accommodate the Black Hawk Aircrew Trainer (BAT) and the Transportable Flight Procedure Simulator (TFPS) including the ECU units for each device. Electrical requirements for each device are: two 120/208v, 200 amp, 60Hz, three phase, 4 wire plus ground services with MS980555C52412S or MS90555C52143S receptacles. The project will connect Simulators to the Fire Alarm System, converting bay areas to a wet pipe sprinkler system, and correct egress deficiencies and other life safety repairs needed to ensure life safety including code required egress/emergency lighting and the like. Finally, the project will also install expanded metal mesh in a prefab arms vault that was installed in the structural repair project (FTW433) to be in compliance with AR190-11 Tab G to be used as an Arms Room. Updates to the existing fire system to meet current building codes may be required. This building has been identified as a historical building. Coordination with the SHPO will be required to ensure project will not violate any laws or regulations. The construction cost limitation for this requirement is $18,000,000. The performance period will be approximately 600 calendar days.

View original listing