SAM #FA481926R0022

Fitness Center Roof Repair at Tyndall Air Force Base

This opportunity involves the repair of the Fitness Center Roof at Building 1601, Tyndall Air Force Base, Florida, for the Department of Defense (Air Combat Command, Department of the Air Force, 325 CONS PKP). - Government Buyer: - Department of Defense, Air Combat Command, Department of the Air Force, 325 CONS PKP - Scope of Work: - Repair of Fitness Center Roof, Building 1601 - Contractor must provide all professional services, permits, equipment, labor, tools, materials, and ancillary items - Work must comply with multiple standards and codes: - Unified Facilities Criteria - Army Corps of Engineers standards - Uniform Building Code, International Building Code - Air Force Standards, Department of Defense Directives - Florida State Statutes, Florida Department of Transportation regulations - Tyndall AFB Facility Excellence Plan - National Electric Code, OSHA, Department of Environmental Protection, EPA regulations - ADA compliance requirements - Procurement Details: - NAICS code: 238160 (Roofing Contractors), size standard $19.0M - Estimated project magnitude: greater than $500,000 - Set aside for HUBZone Small Businesses - Best Value Trade-Off procedures for contract award - OEMs and Vendors: - No specific OEMs or vendors are named in the solicitation - Products/Services Requested: - Professional roof repair services (no part numbers or quantities specified) - Unique Requirements: - Strict compliance with federal, state, and Air Force standards - ADA and environmental regulations - Design and construction phases included in period of performance - Place of Performance: - Tyndall Air Force Base, Florida - Contracting office located at 220 Checkertail Way, Tyndall AFB, FL 32403

Description

This is the official solicitation for the Repair Fitness Center Roof, Building 1601 requirement at Tyndall Air Force Base, FL. This will be a single award, firm-fixed price contract. This requirement is being solicited as a 100% Historically Underutilized Business Zone (HUBZone) Small Business set aside. The Contractor shall be responsible for all professional services, permits, equipment, labor, tools, materials, and ancillary items necessary to complete the tasks defined by the Statement of Work (SOW). The performed tasks shall be based on the project description, other data furnished in SOW, and information covered during a pre-construction/criteria review meeting to be held prior to Contractor mobilization. The Contractor shall adhere to the following guidance during construction phase(s) of this project: Unified Facilities Criteria (UFC) 3-250-01, UFC 3-250-03, UFC 3-600-01, United States Army Corps of Engineers, Uniform Building Code (UBC), those sections of the Southern Standard Building Codes not incorporated in the UBC/International Building Code (IBC) for our respective area, Air Force Standards, Department of Defense (DOD) Directives, Florida State Statutes, Florida Department of Transportation (FDOT), the Tyndall AFB Facility Excellence Plan (Base Regulations), National Electric Code (NEC), Occupational Safety and Health Administration (OSHA) Requirements, Department of Environmental Protection (DEP) Regulations, Environmental Protection Agency (EPA) Regulations, and any related Americans with Disabilities Act (ADA) Compliance Requirements. If there is a conflict between these codes, regulations and specifications, the most stringent requirements shall apply at all times. Documents listed by and/or provided by the Government are for reference only and do not relieve the Contractor from adherence with applicable codes not specifically addressed. The contractor shall also perform the required services in accordance with the SOW, applicable Construction Wage Rate, and all other contract terms and conditions. All work shall be accomplished in accordance with contract documents and most recent Federal and State regulations. The North American Industry Classification System (NAICS) code 238160 will apply to this acquisition. The size standard for this NAICS code is $19.0M. The magnitude for this project is expected to be greater than $500,000. The estimated period of performance is for 270 calendar days (60 for design and 210 for construction) total after notice to proceed. All work shall be in strict compliance with the specifications of the contract. The successful offeror will be selected using Best Value Trade-Off procedures. Once the solicitation is posted, interested parties are advised to review this site frequently for any updates and/or amendments to any and all documents. The entire RFP will be made available only on the PIEE Solicitation module. Potential offerors are responsible for monitoring this site for the release of this document and subsequent amendments. To be eligible for contract award, offerors must be registered and marked active in the System for Award Management (SAM). If necessary, register via the SAM website www.sam.gov. Interested contractors are encouraged to submit their contact information by registering as an interested vendor. Any questions regarding this notice should be directed to the 325th Contracting Construction Flight at felicia.freche.1@us.af.mil or bernard.husted.2@us.af.mil. Refer to Attachment 1 - Section L and M for details on site visit, RFIs, proposals, and evaluation factors and ratings. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for FA481926R0022Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing