SAM #SS1166380

USDA APHIS NWRC Sources Sought: Truck Bed Mounted Camper for Ford F250

The USDA APHIS NWRC is seeking information from vendors for a potential purchase of a truck bed mounted camper for field research operations. - Government Buyer: - United States Department of Agriculture (USDA) - Animal and Plant Health Inspection Service (APHIS) - Wildlife Services (WS), National Wildlife Research Center (NWRC) - OEMs and Vendors: - No specific OEMs or vendors are named; respondents are to identify suitable manufacturers and products - Products/Services Requested: - One (1) self-contained, removable, hard-sided truck camper (no pop-up or soft-sided designs) - Must fit an 8-foot Ford F250 pickup bed with specified dimensions - Factory-installed heating and air conditioning required - Automatic retractable electric jack system - Manufacturer and labor warranties - Printed and electronic manuals - Must comply with Buy American Act; country of manufacture must be specified - On-site demonstration or training before first operation - Unique/Notable Requirements: - Camper must be hard-sided and self-contained (no pop-up or soft-sided models) - Delivery required within 45 days of award - On-site demonstration or training is mandatory - Compliance with Buy American Act is required - Respondents must specify the country of manufacture and provide warranty details - Place of Performance: - Fort Collins, Colorado (NWRC facility) - Contracting office located in Minneapolis, Minnesota

Description

TRUCK BED MOUNTED CAMPER THIS IS A SOURCES SOUGHT NOTICE ONLY FOR MARKET RESEARCH PURPOSES. THIS IS NOT A REQUEST FOR PROPOSAL (RFP), REQUEST FOR QUOTATIONS (RFQ) OR INVITATION FOR BID (IFB). NO FORMAL SOLICITATION IS BEING REQUESTED UNDER THIS NOTICE. This Sources Sought Notice is for market research purposes to identify parties having an interest in and resources to support this requirement for a Truck Bed Mounted Trailer for the United States Department of Agriculture (USDA), Animal and Plant Health Inspection Service (APHIS), Wildlife Services (WS), National Wildlife Research Center (NWRC) in Fort Collins, CO.

The result of this market research will contribute to determining the method of procurement. The Government will review the information requested in this announcement based on the responses to sources sought notice/market research, this requirement may be set-aside for small businesses or procured through full and open competition. The North American Industry Classification System (NAICS) code 336214 (Travel Trailer and Camper Manufacturing) and the size standard is 1,000 employees. NOTE 1: The Buy American Act (41 U.S.C. 8301-05) is the primary federal procurement law providing a preference for domestic goods and manufactured products. As such, the USDA is seeking information on sources that can supply the described instrument either mined, produced or manufactured in the U.S. in sufficient and reasonably available commercial quantities of satisfactory quality. A. Introduction: The USDA, APHIS, WS, NWRC in Fort Collins, CO has a requirement to purchase one (1) Truck Bed Camper that would fit an 8’ Ford F250 pickup truck bed.

B. Minimum Salient Characteristics (including but not limited to the following salient characteristics):

1. Design & Type

Must be a self‑contained, removable truck camper unit. Must be hard‑sided (full amenities); no pop‑up, soft-sided, or elevating-roof designs. Must not require a trailer hitch for installation. Must allow the towing of additional trailers/boats simultaneously.

2. Compatibility With Truck (Hard Requirement)

Must fit securely into an 8 ft Ford F250 pickup bed. Camper must be fully compatible with the following bed dimensions: Bed length: 98 in Bed width: 63.5 in interior 60 in at tailgate opening 50.5 in between wheel wells Bed sidewall height: 21.4 in Wheel well height: 12 in Clearance from bed rails to cab height: 26.5 in

3. Removable Jack System

Camper must have automatic, retractable electric leg‑jacks. Jacks must allow push-button extension to ground. Must allow operator to drive out from under the camper safely and fully.

4. Climate Control (Factory Installed)

Camper must include: Factory-installed heating Factory-installed air conditioning Heating/AC may operate via electric, propane, or both. Temperature must be thermostat controlled. Must be fully functional upon delivery.

5. Warranty

Must include: Manufacturer warranty valid by their stated dates. Labor warranty for minimum 1 year at no cost to the Government.

6. Documentation

Must include: One printed hard copy of all manuals. One electronic PDF version of all manuals. Manuals must cover operation, maintenance, storage, and cleaning.

7. Training

Contractor must provide on-site demonstration or training necessary before first time operation.

8. Delivery Requirement

All materials must be delivered no later than 45 of award.

ADDITIONAL REQUIREMENTS (SUPPORTING BUT NOT “SALIENT”)

Maintenance Support

Contractor must provide: Maintenance demonstration Maintenance instructions Written manuals (covered above)

OTHER PROVIDED INFORMATION (NOT A REQUIREMENT BUT INCLUDED FOR REFERENCE)

Truck Reference Dimensions

Height from top of truck bed to highest point of cab: 26.5 in (25" roof + 1.5" plastic attachments).

(End of Minimum Salient Characteristics) Businesses with the capability to meet these requirements must submit the following information: 1. Product Information: Identify the proposed product/manufacturer meeting the salient characteristics above. Include specification sheets and brochures. 2. Place of Manufacturing / Country of Origin: Specify whether the product is manufactured within the United States in accordance with NOTE 1. 3. Business Size and Socioeconomic Status applicable to the NAICS code listed above: Must indicate whether your business is: - Indian Small Business Economic Enterprise (ISBEE) - Small Business - 8(a) - HUBZone - Service Disabled Veteran Owned Small Business (SDVOSB) - Other than Small Business 4. Company Information: Provide a point of contact (name and email), System for Award (SAM) Unique Entity ID (UEI), and confirmation of active SAM.gov registration. All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. Materials submitted to the Government for review will not be returned. Respondents will not be notified of the results of the evaluation. This is NOT a Request for Proposal (RFP), Request for Quotations (RFQ) or Invitation for Bid (IFB). The Government does not intend to award a contract based on responses received under this announcement. The government will evaluate market information to ascertain potential market capacity to provide services consistent in scope and scale with those described in this notice and otherwise anticipated. To be considered responsive to this Notice, businesses must submit all required documentation by May 29, 2026 , at 1430 (2:30 PM) EST. Any response that does not follow these instructions will not be considered. Do not include any quotes with your response. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Inquiries will only be accepted by e-mail to Mario Garcia at mario.garcia2@usda.gov.

View original listing