SAM #W912DS26BA017

Maintenance Dredging Services for Hudson River at Haverstraw Bay, NY

This opportunity from the U.S. Army Corps of Engineers (USACE), New York District, seeks maintenance dredging services for the Hudson River Federal Navigation Project at Haverstraw Bay, NY. - Government Buyer: - U.S. Army Corps of Engineers (USACE), New York District (NAN) - Scope of Work: - Removal of approximately 200,000 cubic yards of shoals from the Federal Navigation Channel at Haverstraw Bay - Dredged material to be transported and placed at the Historic Area Remediation Site (HARS) in the Atlantic Ocean - Dredging to a depth of -32 feet Mean Lower Low Water (MLLW) plus 1-foot allowable over depth - Equipment and Methods: - Requires use of a mechanical dredge with a closed clamshell environmental bucket - May involve hopper barges, tugboats, and attendant plants for dredging, transport, and placement - Unique Requirements: - All necessary permits provided by the Government; contractor must comply with all permit conditions - Water Quality Certification restricts in-water dredging to August 15th through October 31st - OEMs and Vendors: - No specific OEMs or vendors are named in the solicitation - Place of Performance and Delivery: - Haverstraw Bay, NY (dredging site) - Historic Area Remediation Site (HARS), New York Bight Apex, Atlantic Ocean (placement site) - USACE New York District office (contracting office) - Period of Performance: - Work must occur between August 15th and October 31st, with start within five days of Notice to Proceed

Description

The New York District (NAN) of the U.S. Army Corps of Engineers (USACE) proposes to perform maintenance dredging of the Hudson River Federal Navigation Project. The dredged material shall be transported to and placed at the federally approved Historic Area Remediation Site (HARS) located at the New York Bight Apex in the Atlantic Ocean. The proposed maintenance dredging will require the removal of approximately 200,000 cubic yards of critical shoals from the Federal Navigation Channel (FNC) at Haverstraw Bay, NY. The dredge area is located at RM 35 - 40 of the Hudson River and is approximately 60 miles from the HARS. Dredging is required to a depth of -32 feet Mean Lower Low Water (MLLW) datum plus 1-foot allowable over depth. The dredge material is expected to consist primarily of silt and clay. Dredging at the Haverstraw area will require the use of a mechanical dredge with a closed clamshell environmental bucket. The Contractor may also require the use of hopper barges, tugboat(s) and attendant plant(s) to perform dredging, transport and unloading/placement operations. All necessary permits required for the dredging and dredged material placement will be provided by the Government. The Contractor will be required to meet all conditions pertaining to dredging and dredge material placement as specified in these permits. Water Quality Certification restrictions prohibit performing any in-water dredging work earlier than August 15th or later than October 31st. The Contractor will be required to commence work within five (5) calendar days after receipt of the Notice to Proceed and shall prosecute work diligently to substantially complete all work within the time periods provided. Plans and Specifications for the subject project will be available June 2026, with bid opening on/about July 2026. It is the intention of the Government to award on Aug 2026 and issue the NTP on/about 10 Aug 2026.Liquidated Damages are expected to be $2,015.00 per calendar day of delay until all work under the contract is accepted. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W912DS26BA017Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing