Air Force Seeks Information on Security Forces Ballistic Helmets and Accessories

The U.S. Air Force, through the 773rd Enterprise Sourcing Squadron at JBSA-Lackland, Texas, is seeking information from industry on standardized Security Forces ballistic helmets. - Government Buyer: - Department of Defense, Department of the Air Force, Air Force Materiel Command, AF Installation & Mission Support Center, 773rd Enterprise Sourcing Squadron (FA8052) - Located at JBSA-Lackland, San Antonio, Texas - Products/Services Requested: - Ballistic helmets meeting or exceeding NIJ Level-IIIA (NIJ STD 0106.01/0108.01) and Advanced Combat Helmet (ACH) blunt impact protection (AR/PD 10-02) - Dual-layered adjustable padding system - Available in Coyote Brown and Black - Helmet covers in Tactical Black and Operational Camouflage Pattern (OCP) - Each helmet must include: - Chinstrap extender - Detachable Wilcox three-hole night vision shroud (part number 56100G34, Cage: 004S1) - Left and right accessory rail connector systems with Magpul MOE 5-Slot Mounting Kits - Compatibility with Surefire HLM-01-TN, Princeton Tech Switch MPLS LED Task Light, Liberator IV/V Advanced Dual Communication Headsets, 3M Com-TAC VINIB Peltor Headsets, M-50 Gas Mask (4240-01-512-4437), and Paulson Riot Shield AGL PPK1007R - Must be Berry Amendment compliant - Must fit a wide range of head sizes and be listed on the USAF Approved for Use List (AUL) per AFI 10-3503 - Unique/Notable Requirements: - Military-grade Velcro patches - Jump certification - Compatibility with ballistic mandibles - OEMs and Vendors Mentioned: - Wilcox (night vision shroud) - Magpul (accessory rails) - Surefire (tactical light) - Princeton Tech (LED task light) - Liberator (headsets) - 3M (Peltor headsets) - Paulson (riot shield) - M-50 Gas Mask (Avon Protection) - Place of Performance/Delivery: - JBSA-Lackland, San Antonio, Texas - The request is for information and planning purposes to inform future acquisition strategy.

Description

Salient Characteristics The Standardized Security Forces Ballistic Helmet shall:

1. Meet or Exceed National Institute of Justice (NIJ) Level-IIIA with ballistic performance per  (IAW) NIJ STD 0106.01/NIJ STD 0108.01.

2. Meet or exceed current Advanced Combat Helmet (ACH) Blunt Impact Protection requirements IAW  AR/PD 10-02 while providing a center channel for communication headband clearance.

3. Padding/Liner System: The helmet must provide a dual-layered adjustable individual padding  system (with at least 14 individual pads) to accommodate the respective sizing spectrums identified  below. The padding systems must have comfort foam sealed with anti- microbial wicking fabric. The  padding system must have a removable center pad to accommodate overhead communications systems  easily. Replacement pads and systems need to be available for replacement purchases.

4. Color: The helmet must be available in Coyote Brown and Black in color with helmet covers  available in Tactical Black and Operational Camouflage Pattern (OCP) (Note: The helmet cover must  fit on the helmet reflecting a tactical appearance, i.e., assist with concealment for operations in  a tactical environment). Replacement covers need to be available for replacement purchases.

5.  Helmet Cover: Each helmet must come with a helmet cover. Covers must be available in Tactical  Black and Operational Camouflage Pattern (OCP) (Note: The helmet cover must fit on the helmet  reflecting a tactical appearance, i.e., assist with concealment for operations in a tactical  environment). Replacement covers need to be available for replacement purchases. The helmet cover  must have Velcro in the exact locations as the helmet's shell with the addition of a bungee  retention system integrated into the Velcro patch on the top/center of the helmet cover. The helmet  cover must have a cable management system integrated into it. The helmet cover must have an opening  in the front to accommodate the NVG shroud. Helmet covers must come with an optional OCP in color  counterweight pouch with Velcro closure and ability to attach to side rails via strap or elastic  band (tan).

6. Retention System: The retention system must meet ACH pull strength requirements with a  high-strength hook and loop attachment. Feature a dial retention system and a single one-handed  action quick-release capability utilizing high-strength materials resistant to weather and  perspiration degradation. The chinstrap must have locking mechanisms to secure straps and prevent  slippage. Chinstrap must include additional padding sewn into the dual straps for the chin.

7. Chinstrap Extender: Each helmet must come with a chin strap extender to allow the wearer to wear  a Military Chemical Suit Jacket top and the M50 Joint Service General Purpose Gas Mask. When worn, the chin strap must be able to be fastened with both accouterments.

8. Night Vision Shroud: Each helmet must include a coyote brown or black detachable WILCOX three  hole night vision shroud (Part # 56100G34, Cage: 004S1)compatible with the night vision devices  listed in Para. 8(i).

i.  The helmet shroud must accommodate the following accessories: 1) AN/PVS-7B: 5855-01-228-0937 2) AN/PVS-7D: 5855-01-422-5413 3) AN/PVS-14: 5855-01-423-0524 4) AN/PVS-31A: 5855-01-618-8462 5) AN/PSQ-20: 5855-01-534-6449 6) NVG Bracket Mount: 5340-01-509-1467 9. Left and Right Accessory Rail Connector System (Side): Each helmet must include a coyote brown  or black side accessory rails connector system must attach via bolts and be attached on the left  and right sides of the helmet. The rails system must consist of (1) Magpul MOE 5-Slot Mounting Kit  with Two (2) 5-Slot Picatinny Rails for mounting standard Picatinny/MIL-STD-1913 accessories.

a. Due to the past performance of Security Forces units, feedback has indicated the critical need  that all that mounts and rails must be mounted via bolts to provide the necessary security to  minimize potential defects.

b. The end-users need to replace shrouds and rails has been proven relevant.

c. The accessory rail connector system must have slots for custom mounting and compatibility to  accommodate tactical headsets and must be able to adjust the below accessories (see items below 

i).

i.  The helmet rails must accommodate the following accessories:

1) Surefire: HLM-01-TN 2) Princeton Tech Switch MPLS LED Task Light 3) Liberator IV and V Advanced Dual Communication Headsets 4) 3M Com-TAC VINIB Peltor Headsets 5) M-50 Gas Mask: 4240-01-512-4437 6) Paulson Riot Shield AGL PPK1007R

10. Ear Clearance: Provide more clearance around the ear than the ACH mid-cut, cover the entire  head area, and have a high-cut ear area. Must have a military-grade Velcro patch on the helmet's  shell on the right and left side above the rail (2" x 3 ½"). Military-grade Velcro patch on the  top/center of the helmet shell (2" x 6 ½").

11. Jump Certification: The helmet must be listed on the United States Air Force (USAF) Approved  for Use List (AUL) as required by Air Force Instruction (AFI) 10-3503, Personnel Parachute Program,  paras. 4.3.1 and 4.4.1.

12. Military-grade Velcro patches: The helmet must have a Military-grade Velcro patch on the  rear/base of the helmet (1 ½" x 6") with (3 ½") in height along the rear of the rails only.

12. Helmet Weight: The helmet weight must be between 1.6 lbs. and 2.8 lbs. before and after shroud installation, accessory rail, impact liner, and retention system.

13. Fit Sizes: Helmets must accommodate hat sizes from 6 5/8 -7 ½ and 7 3/8 -7 7/8 or head  circumferences (inches) 20.5-23.5 and 23-24.75. Fit head sizes 52-63cm with shell sizes.

14. Care Instructions: Each helmet must come with individual care/handing instructions, how to fit,  and a wear guide included with the helmet. 15. Be fully Berry Amendment compliant.

16. Must accommodate ballistic mandible.

SUBMISSION DETAILS/INFORMATION SOUGHT BY THE GOVERNMENT:

1. Your general company information, to include:

- Company name

- Address

- Point of contact (POC)

- Phone number

- E-mail address

- Commercial and Government Entity (CAGE) Code

- Unique Entity ID

- Business Size (i.e., Small Business, Other than Small)

- NAICS code(s) the company usually performs under

2. Capabilities statement providing sufficient information (such as product literature) describing your company's ability to meet the minimum salient characteristic.

ALL SUBMISSIONS MUST BE RECEIVED NO LATER THAN 1:00PM CENTRAL TIME ON Wed, 3 June 2026.

Packages are to be sent via email to POC:

Homer Rios, Contract Specialist 

Emial: homer.rios@us.af.mil 

View original listing