SAM #1605C4-26-N-00003

MSHA Concrete Demolition and Installation Project at Approval & Certification Center, Triadelphia, WV

The Department of Labor's Mine Safety & Health Administration (MSHA) is seeking a contractor for a comprehensive concrete demolition and installation project at the MSHA Approval & Certification Center campus in Triadelphia, West Virginia. - Government Buyer: - Department of Labor, Mine Safety & Health Administration (MSHA), Approval & Certification Center - Scope of Work: - Demolition and replacement of concrete at multiple campus locations: - Building 1: Front entrance plaza (including flagpole base and accessible curb ramp), rear loading dock (including dock leveler, bumpers, angle, and handrail) - Building 3: Driveway drainpipe replacement (24" HDPE pipe), front entrance steps (conversion from three 8" risers to four 6" risers, bottom landing, curb, and reinstallation of railings) - Building 7: Garage and salt bin apron (approx. 72' x 30' area and 30' x 53' apron) - Concrete specifications: - 4,000 PSI mix (8" thick for loading dock and apron, 4" thick for plaza and steps) - Wire mesh or #4 rebar mat reinforcement - Light broom finish - Cure & seal application - 24" HDPE pipe for drain replacement - 4,500 PSI concrete for driveway drainpipe - Asphalt topping for driveway - Products/Services Requested: - No specific OEMs or branded products are mentioned; all materials must meet contract standards - Contractor must provide all personnel, equipment, tools, materials, supervision, and non-personal services - Unique Requirements: - All work must comply with detailed specifications for thickness, reinforcement, finish, and curing - Reinstallation of existing hardware (dock leveler, railings, etc.) - Firm-fixed price contract - Completion required within 60 days after notice to proceed - Place of Performance: - MSHA Approval & Certification Center, 765-766-556 Technology Drive, Triadelphia, WV 26059

Description

MSHA’s Approval and Certification Center (A&CC), located in Triadelphia, West Virginia, consists of 96 acres of property and numerous buildings that house laboratories, offices, and storage. The A&CC approves and certifies certain mining products for use in underground coal and gassy underground metal mines. Technical experts evaluate and test equipment, instruments, and materials for compliance with Federal Regulations. Products evaluated and tested range from extremely small electronic devices to very large mining systems. Following successful completion of evaluation and testing of a product, a license is issued authorizing a manufacturer to produce and distribute products for use in mines. The MSHA approval issued by the Center is internationally recognized.

The Center performs other technical functions in support of MSHA's programs, including investigations of safety and health concerns relating to product approvals; litigation assistance on issues involving approved products; accident investigation assistance when an explosion, fire, injury or fatality involves or may involve approved equipment; identification of the need for technical solutions to problems in application of mining equipment, materials, and explosives; technical assistance in developing new or revised Federal standards and regulations; and research assistance to other Government agencies on research programs that directly relate to MSHA. The Center also provides engineering support and technical assistance in the area of industrial safety.

View original listing