California State University PlanetBids #PRC-00040

CSUSB Track & Field Throws Area Installation with UCS Spirit Hammer Discus Cage

California State University San Bernardino is seeking bids for the installation of a new track and field throws area, with a focus on NCAA-compliant equipment and construction standards. - Government Buyer: - The Trustees of the California State University, Cal State San Bernardino - Procurement contact: Megann Martinez, Capital Project & Contract Specialist - OEMs and Vendors: - UCS Spirit (manufacturer of the specified hammer/discus cage, Model 570-3600R) - C-Below (referenced for underground utility surveying) - Products/Services Requested: - Installation of three reinforced concrete pads with rebar, including framing, pouring, and finishing - Erection of a UCS Spirit Model 570-3600R Hammer Discus Cage, including all main net posts, door posts, doors, ground sleeves, nets, and net stabilizer arms per NCAA standards - Construction of a shot put area with code-compliant reinforced concrete pad (10x30) and installation of ground equipment for shot put toe board - Installation of a storage container pad (12x22) with proper drainage - Excavation and site preparation for all installations - Engineered shop drawings for all concrete pads, footings, and anchorage systems, signed by a California-licensed structural engineer - Surveying of underground utilities prior to construction - Unique/Notable Requirements: - Throws cage must be installed to exact manufacturer (UCS Spirit) specifications - Contractor must possess a C-61/D-34 Prefabricated Equipment Contractor license and be DIR Registered - Compliance with prevailing wage, union, and safety standards is mandatory - Engineered shop drawings must be provided and signed by a California-licensed structural engineer - Liquidated damages of $325 per day for project delays - University will provide the cage equipment and net system - Work to be performed east of the softball field at CSUSB, San Bernardino

Description

California State University San Bernardino is soliciting bids for the installation of three cement pads with rebar reinforcement, erection of a throws cage per manufacturer's specifications, excavation for optimal installation, and installation of ring forms for each concrete pad. The work must comply with industry and union standards, safety regulations, and requires a C-61/D-34 Prefabricated Equipment Contractor license. The project includes a pre-bid meeting on May 26, 2026, and bids are due by June 16, 2026. Liquidated damages are set at $325 per day for delays.

View original listing