SAM #36C26326Q0706

VA Solicitation for Asiga Ultra 4K 3D Printer Bundle and Cure 1.5, Brand Name or Equal

The Department of Veterans Affairs, Network Contracting Office 23, is seeking high-precision 3D printing and curing equipment for the St. Cloud VA Health Care System. - Government Buyer: - Department of Veterans Affairs, VISN 23, Network Contracting Office 23 - OEMs and Vendors: - Asiga (OEM) - Products/Services Requested: - Asiga Ultra (50) 4K Printer Bundle (P/N: 190102), quantity: 1 - Includes: Composer software (lifetime updates), sample material, build tray, curing chamber, calibration toolkit, turnkey ready-to-use system, high precision 3D printing, advanced features - Asiga Cure 1.5 (P/N: 190115), quantity: 1 - Features: immersive light curing, high-powered ultraviolet LEDs, touchless entry, hands-free lid opening, infrared heating, vacuum curing, intelligent dose curing, inert gas connectivity, standard manufacturer warranty - Unique/Notable Requirements: - All equipment must be made in America - Brand name or equal products accepted - Place of Performance: - St. Cloud VA Health Care System, St. Cloud, Minnesota

Description

REQUEST FOR INFORMATION / SOURCES SOUGHT for Asiga Ultra (50) 4K Printer Bundle, Brand-Name or Equal: STIPULATION: MUST BE MADE IN AMERICA

DEPARTMENT OF VETERANS AFFAIRS, VISN 23 Source Sought: The VA is seeking business sources qualified to provide some, or all, of the items listed below as Brand Name or Equal. This is NOT a solicitation.

INTERESTED SOURCES SHALL RESPOND BY:

Please submit response no later than 5:00pm CST Tuesday, May 19, 2026

All responses and questions must be emailed to Amanda.Patterson-Elliott@va.gov and must include in the subject line: Sources Sought - Asiga Ultra (50) 4K Printer Bundle - 36C26326Q0706 NO PHONE CALLS

POTENTIAL SOURCES SHALL PROVIDE THE FOLLOWING INFORMATION IN THEIR RESPONSE:

1. Company name, address, phone number, primary contact(s), e-mail address.

2. State if your firm distributes the Brand Name items, or Equal items.

3. SAM UEI number.

4. NAICS (North American Industry Classification System) code 339114 Dental Equipment and Supplies Manufacturing

5. State if your firm is a large business, small business, service-disabled-veteran-owned small business, veteran-owned small business, HUB zone 8(a), women-owned small business or a small disadvantaged business.

   1. State if your firm has the required items on Schedule (FSS, GSA, SEWP, other ).

6. Provide a letter from the manufacturer verifying your firm is an authorized distributor.

   1. Provide the country of origin for each of the required items.

REQUIRED ITEM and Salient Characteristics: Contractor shall provide Brand Name or Equal equipment as follows:
*Asiga Ultra (50) 4K Printer Bundle Mfr.: Asiga P/N: 190102 Quantity: 1 each

Ultra (50) 4K 3D printer Composer software (lifetime updates included) 1 kg Asiga material (sample) 2 L Endurance build tray Flash post curing chamber Calibration toolkit Turnkey, ready-to-use High precision 3D printing Calibrated right outside the box LED screen No sharp edges Toggle between locked and unlocked Withstand high volume production Accurate and high print quality Motion sensor for touchless hood opening Electromagnetic build platform holder Rapid material change over (<30 s) Electrical: 90-264VAC, 50/60Hz, 600 Watts Core Printer Features Build size: approximately 192 × 108 × 145 147 mm (7.55 × 4.25 × 5.78 in) 50 µm pixel resolution  4K DLP micromirror imaging 385 nm UV LED  Precision control for accurate layer thickness and speed  Over 500 industry leading materials with unrestricted access Infrared material heater up to 70 °C Built in chamber heating for consistent performance Transparent mode for ultra precise printing of true water clear resins 

Software Composer software offers automatic part placement, automatic supports, and full access to advanced settings  Supports file formats: STL, SLC, PLY, STM (Asiga Stomp)  Network options: Wi Fi, WirelessDirect, Ethernet  Unlimited lifetime technical support 

*Asiga Cure 1.5 Mfr.: Asiga P/N: 190115 Quantity: 1 each

Chamber size: approximately 143 x 199 x 60 mm Immersive light curing with high-powered ultraviolet LEDs Touchless entry Hands free touchless lid-opening Infrared heating Vacuum curing Intelligent dose curing
Inert gas connectivity Electrical: 100-240V AC 50-60 Hz

Standard manufacturer warranty

DISCLAIMER AND ADDITIONAL NOTICES:

Responses may be used as research to better understand the marketplace or for creating a potential future acquisition. Response is strictly voluntary; no reimbursement will be made for any costs associated with providing information in response to this or future information requests.

AT THIS TIME NO SOLICITATION EXISTS. (DO NOT REQUEST A COPY OF THE SOLICITATION).

This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization's qualifications to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a solicitation may be published in Federal Business Opportunities. However, responses to this notice will not be considered adequate responses to a solicitation.

No Proprietary, classified, confidential, or sensitive information should be included in your response. The Government reserves the right to use any non-proprietary technical information in any resultant solicitation(s.)

View original listing