SAM #52000QR260024846

USCGC JOHN PATTERSON Hull Cleaning and Zinc Anode Renewal Solicitation

The U.S. Coast Guard Surface Force Logistics Center (SFLC) is seeking small business contractors to perform hull cleaning and zinc anode renewal services for the USCGC JOHN PATTERSON while moored in Boston, MA. - Government Buyer: - U.S. Coast Guard, Surface Force Logistics Center (SFLC) Procurement Branch 1 - Products/Services Requested: - Cleaning and inspection of the vessel's underwater hull, including removal of marine growth and debris - Polishing of propellers - Video documentation of underwater surfaces before and after cleaning - Renewal of government-furnished zinc anodes and related hardware (bolt-on zinc anodes, self-locking nuts, screws, zinc plates) - Stern Tube Zinc Anode (Part #Z0020202H3): 28 units - Self-Locking Nut (Part #90715A145): 48 units - Sea Chest Grate Zinc Anode (Part #GA-4): 4 units - Prop Zinc Plate Screw (Part #950756): 8 units - Sea Chest Grate Anode Screw (Part #93190A634): 4 units - Stern Tube Cover Screw Cap (Part #90585A626): 42 units - Propeller Zinc Plate (Part #950733): 2 units - Bow Thruster Gear Case Zinc Anode (Part #1081226): 1 unit - Bow Thruster Tunnel Zinc Anode (Part #CM2000Z): 12 units - Unique/Notable Requirements: - All work must be performed while the vessel is moored at 427 Commercial Street, Boston, MA - Contractors must use government-furnished, part-numbered components - Video highlights of underwater surfaces are required before and after cleaning - Protective measures must be taken to prevent contamination and damage to coatings - All personnel must have REAL ID-compliant identification for access - Compliance with Coast Guard maintenance procedures and technical drawings is mandatory - No specific OEMs are named; all materials are government-furnished with specified part numbers - The opportunity is a small business set-aside under NAICS 336611 (Ship Building and Repairing)

Description

52000QR260024846 USCGC JOHN PATTERSON HULL CLEANING

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information in this notice. This solicitation is issued as a Request for Quote Number 52000QR260024846 USCGC JOHN PATTERSON HULL CLEANING.

 This procurement will be processed in accordance with FAR Part 12.

The North American Industry Classification System (NAICS) is 336611 - Ship Building and Repairing. This is a total small business set aside; all responsible small business sources may submit proposals that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13.

THE UNITED STATES COAST GUARD SURFACE FORCE LOGISTICS CENTER REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT:

52000QR260024846 USCGC JOHN PATTERSON HULL CLEANING

U/W Body (Waterborne), Clean and Inspect, Renew Zinc Anodes

1. Scope

1.1 Intent. This work item describes the requirements for the Contractor to clean the vessel’s U/W body and to renew bolt-on zinc anodes, while the vessel is moored pier side.

1.2 Cutter, Address, Availability, and POC. USCGC JOHN PATTERSON, 427 Commercial Street Boston, MA. 02109. Period of Performance (POP): 1-5 June, 2026. Cutter POC: EMC Donald Crowell, Cell #: (774) 836-6785, Donald.c.crowell@uscg.mil

1.3 Government-furnished property.

ITEM DESCRIPTIONNSN/PNQTYESTIMATED COST ($/UNIT) Anode, stern tubeP/N: Z0020202H3 NIIN: 01644548328 ea.$11.15 Nut, Self-LockingP/N: 90715A145 NIIN: 0150857742 Bx *24 in a bx$7.24 Anode, Sea Chest GrateP/N: GA-4 NIIN: 0164761794 ea.$21.93 Screw, Prop zinc plateP/N: 950756 NIIN: 0163402108 ea.$9.42 Screw, Sea Chest Grate AnodeP/N: 93190A634 NIIN: 0161971824 ea.$9.70 Screw Cap, Stern Tube CoversP/N: 90585A626 NIIN: 01616110742 ea.$1.81 Zinc plate, propellerP/N: 950733 NIIN: 0162789412 ea.$618.85 Anode, Bow Thruster, Gear Case, Bolt OnP/N: 1081226 NIIN: 1235618701 ea.$64.97 Anode, Bow Thruster, Tunnel, Bolt OnP/N: CM2000Z NIIN: 20012633412 ea.$29.46

2. REFERENCES

Coast Guard Drawing 154B WPC 111-301, Rev A, Shell Expansion Coast Guard Drawing 154B WPC 161-301, Rev -, Skegs and Stern Tubes Support Structures Coast Guard Drawing 154B WPC 562-201, Rev -, Rudder Details Coast Guard Drawing 154 WPC 565-201, Rev -, Fin Stabilizer System A & D Coast Guard Drawing 154B WPC 568-201, Rev B, Bow Thruster System A & D Coast Guard Drawing 154 WPC 997-302, Rev -, Docking Plan

COAST GUARD PUBLICATIONS

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Maintenance Procedure Card B10015.D (MPC B10015.D), 10/31/24, Insp/Cln U/W Equipment (Hull Plate) Surface Forces Logistics Center Maintenance Procedure Card B10018.D (MPC B10018.D), 5/31/23, Replace Underwater Zinc Anodes

OTHER REFERENCES None

3. REQUIREMENTS

3.1 General.

3.1.1 CIR. None.

3.1.2 Tech Rep. Not Applicable.

3.1.3 Protective measures. The Contractor must furnish and install all protective coverings to seal off and protect all non-affected vessel's components, equipment, and spaces near the work area against contamination during the performance of work. Upon completion of work, the Contractor must remove all installed protective measures, inspect for the presence of contamination, and return all contaminated equipment, components, and spaces to original condition of cleanliness.

3.1.4 Interferences. The Contractor must handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences).

3.2 Requirements.

3.2.1 Video recording. Submit video highlights of underwater body surfaces (e.g., bow thruster, propellers, rudders, transducers, heavily fouled hull areas, etc.) before and after cleaning. 3.2.2 Clean/inspect. Clean the U/W body surfaces free of all marine growth, debris, and all other surface contaminants in accordance with MPC B10015.D. Remove and replace sea chest grating if necessary to access/clean sea chest suction. Ensure all transducer surfaces are cleaned with only hand-held brushes, without the use of power attachments. Ensure that existing underwater body coating system or non-coated surfaces do not incur any damage during cleaning process. Polish propellers. Refer to Coast Guard drawings listed in Section 2. 3.2.3 Renew anodes. Renew Government-furnished components listed below paragraph 1.2. in accordance with MPC B10018.D. Anodes may require slight modification to ensure proper fit (i.e., trimming metal tabs, drilling tab bolt holes).

4. NOTES This section is not applicable to this work item.

View original listing