City of Farmington Ionwave #26-167077 Addendum 1

Farmington Runway 7/25 and Lighting Rehabilitation at Four Corners Regional Airport

The City of Farmington is seeking a contractor to rehabilitate Runway 7/25 and its associated lighting systems at Four Corners Regional Airport in Farmington, New Mexico. - Government Buyer - City of Farmington, Purchasing Department and Four Corners Regional Airport - Scope of Work - Comprehensive mill-and-overlay of Runway 7/25 - Pavement grooving, final and temporary pavement markings - Installation of new wiring, base-mounted medium intensity runway edge lights (L-861, with heater option), airport signs (multiple modules), and sign pads - Removal and replacement of existing lighting, cables, and airfield signs - Miscellaneous concrete structures and electrical work to FAA standards - Key Products and Quantities - Asphalt Surface Course: 8,885 tons (P-401a) - Bituminous Material (PG 70-22): 715 tons (P-401b) - Emulsified Asphalt Tack Coat: 10,535 gallons (P-603) - Emulsified Asphalt Seal Coat: 660 gallons (P-608) - Cold Milling (2 inches): 70,225 square yards (P-101a) - Crack Sealant: 3 tons (P-101b) - Final Marking: 121,400 square feet (P-620a) - Temporary Marking: 72,790 square feet (P-620b) - Saw-Cut Grooves: 59,560 square feet (P-621) - Base-Mounted Medium Intensity Runway Edge Light (L-861, with heater): 58 units (L-125a) - Lighted Signs: 6 (1 module), 9 (2 module), 5 (3 module) (L-125b-d) - #8 AWG, 5kV, L-824 Type C Cable: 21,000 linear feet (L-108a) - #6 AWG Bare Counterpoise Wire: 1,500 linear feet (L-108b) - Non-Encased Electrical PVC Conduit (2-inch): 1,500 linear feet (L-110) - Services - Contractor Quality Control Program (CQCP) - Mobilization and project inspection - Quality control testing, acceptance surveying, and safety plan compliance - Removal and installation of lighting and signage - Notable Requirements - Compliance with FAA Buy American Preference, Davis-Bacon wage rates, and federal/state safety regulations - Contractor must provide a quality control program and on-site testing lab for asphalt mix - Coordination with airport operations for phased construction and minimal air traffic disruption - All contractors/subcontractors must be registered with the New Mexico Department of Workforce Solutions - Liquidated damages of $2,100 per day for delays - OEMs and Vendors - No specific OEMs are named; all materials and equipment must meet FAA and project specifications - Estimated Contract Value - Approximately $4 million (with $3.8 million in federal funds) - Place of Performance - Four Corners Regional Airport, 1296/1300 W. Navajo Street, Farmington, NM 87401 - City of Farmington government offices for billing and administration

Description

This solicitation is for a construction bid to rehabilitate Runway 7/25 and associated runway lights at Four Corners Regional Airport in Farmington, NM. The contractor is required to furnish all labor, equipment, and materials necessary for the rehabilitation work. The project includes mill-and-overlay operations, pavement markings, grooving, installation of new wiring, runway lights, airport signs, and sign pads. The contract documents and engineering for this project were completed by Lochner. The project is federally funded and subject to applicable federal contract clauses.

View original listing