SAM #FA302226Q0009

Fiber Optic Cable Installation and Testing at Columbus Air Force Base, MS

The U.S. Air Force at Columbus Air Force Base, Mississippi, is seeking a contractor to engineer, furnish, install, and test (EFI&T) a new fiber optic cable connection between Infrastructure Transfer Building (ITB) 230 and Building 9511 (Fuel).
- Scope of Work: - Install approximately 3,100 feet of 12-strand single mode fiber optic cable between ITB 230 and B9511 - Provide and install two 12-port fiber optic distribution panels (FODPs): one in ITB 230 and one outdoor at B9511 - Install five 3-cell geotextile innerducts between maintenance holes and B9511 - Complete all splicing, termination (with SC connectors), and testing of the fiber optic cable - Deliver detailed as-built drawings and test reports - Requirements: - Comply with all federal, state, and base safety, security, and environmental standards - Provide project management, site coordination, and quality assurance - Set aside for small businesses under NAICS code 238210 - No specific OEMs, brands, or part numbers are specified; the opportunity is open to qualified vendors able to meet the technical requirements - The period of performance is 120 days from contract award, with some documents referencing a one-month window for completion - All work is to be performed at Columbus Air Force Base, MS

Description

Engineer, furnish, install and test (EFI&T) 12-strand single mode (SM) fiber optic cables (FOC) from Infrastructure Transfer Building (ITB) 230 to Building (B) 9511 at Columbus AFB, MS.

The Contractor shall install approximately 3,100 feet (maintenance loop included) of 12-strand SM FOC from ITB 230 to B9511.  Terminate 12 strand SM FOC in the new 12-port FODP in ITB 230, and outdoor FODP in B9511.

View original listing