SAM #W912WJ26QA106

Franklin Falls Dam Service Gate #1 Sheave Block and Wire Rope Replacement

This opportunity from the U.S. Army Corps of Engineers, New England District seeks a contractor for critical maintenance at Franklin Falls Dam in New Hampshire. - Government Buyer: - U.S. Army Corps of Engineers, New England District (DEPT OF DEFENSE.DEPT OF THE ARMY.US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION NORTH ATLANTIC.ENDIST NEW ENGLAND) - Products/Services Requested: - Replacement of the lower sheave block and wire rope for Service Gate #1 - Removal and replacement of multiple components of the lower sheave block assembly - Replacement of the entire length of wire rope for a 70-ton Philips and Davies gate hoist - All work must comply with ASME B30 standards for Load Handling Equipment - Contractor to provide all equipment, materials, and labor - Unique/Notable Requirements: - No specific OEMs or part numbers are specified, allowing for a range of qualified suppliers - Set aside for small business vendors under NAICS code 238290 (Other Building Equipment Contractors) - Place of Performance: - Franklin Falls Dam, Franklin, NH - Contracting Office: - KO CONTRACTING DIVISION, Concord, MA

Description

The U.S. Army Corps of Engineers – New England District is issuing a Presolicitation Notice for Service Gate #1 Lower Sheave Block and Wire Rope Replacement, Franklin Falls Dam, Franklin, NH.

QUESTIONS REGARDING THE PROCUREMENT WILL NOT BE ANSWERED DURING THE PRESOLICITATION PHASE.  SUBMIT QUESTIONS TO THE CONTRACT SPECIALIST AFTER THE SOLICITATION AND ASSOCIATED DOCUMENTS HAVE BEEN POSTED.

THE WORK CONSISTS OF: Contractor shall furnish all equipment, materials, and labor necessary to remove and replace multiple components of the lower sheave block assembly as well as the entire length of wire rope associated with the 70-ton Philips and Davies gate hoist for Service Gate #1 at the Franklin Falls Dam. The Contractor shall supply and install the new lower sheave block components and wire rope according to the Statement of Work, Specifications, and ASME B30 standards for Load Handling Equipment of this type and configuration.

The magnitude of construction is between $250,000 and $350,000.  For additional information on construction contracts awarded to small businesses please visit: Partnering With Us (army.mil).

This is not a request for quotes at this time.  The solicitation requirements and contract documents, to include instructions for submission, and the response date will be available on or about May 21, 2026.  Neither telephonic, mailed nor faxed requests for hard copies of this solicitation will be accepted.  The solicitation will only be available online; in order to download the solicitation offerors must access the Contract Opportunities website (www.SAM.gov). 

This procurement is set-aside for small business vendors. The applicable NAICS code is 238290 with a Small Business Size Standard of $22 Million.

ALL VENDORS MUST HAVE AN ACTIVE REGISTRATION IN SAM.GOV AT THE TIME OF SUBMISSION IN ORDER TO BE CONSIDERED. ANY VENDOR THAT DOES NOT HAVE AN ACTIVE SAM.GOV REGISTRATION WILL BE REJECTED AS NON RESPONSIVE.

View original listing