SAM #TEMP-10455724

Cooling Tower Condenser Pump and Motor Assembly Repair at Nellis Air Force Base

This opportunity seeks qualified contractors to repair a seized cooling tower condenser pump and motor assembly at Nellis Air Force Base. - Government Buyer: - United States Air Force, Air Force Test Center (AFTC), FA9302 AFTC PZZ - 445th Test Squadron (445 TS/EWJX), Nellis Air Force Base - OEMs and Vendors: - No specific OEMs or vendors are named in the solicitation or attachments - Products/Services Requested: - Cooling Tower Condenser Pump and Motor Assembly Repair Service - Removal, inspection, attempted corrective repair of Condenser Pump 2 and motor assembly - Bearing replacement if repairable; conditional replacement with government approval if beyond economical repair - Provision of replacement materials (motor bearings, gaskets, seals, consumables, installation hardware) - System alignment, operational testing, and restoration to full operational status - One-year warranty on all work and parts - At least one annual service visit - All labor, materials, equipment, and certified personnel required - Unique/Notable Requirements: - Personnel must be U.S. citizens with REAL ID for base access - Work must be performed by experienced and qualified personnel - Replacement of pump/motor requires prior government approval - Site preparation, safety procedures, and restoration included - Place of Performance: - Nellis Air Force Base, Building 1733, 4091 Kinley Ave - Mike OCallaghan Federal Medical Center (for emergency medical services) - Contracting office at Edwards Air Force Base, CA - Period of Performance: - To be determined; offerors must submit projected period of performance - Includes at least one annual service visit and a one-year warranty

Description

Description(s):  SOURCES SOUGHT FOR COOLING TOWER CONDENSER PUMP REPAIR AT NELLIS AFB.

THIS IS A MARKET SURVEY FOR INFORMATION ONLY. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT WILL BE AWARDED FROM THIS SYNOPISIS. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS SYNOPSIS OR ANY FOLLOW-UP INFORMATION REQUESTS. THE PURPOSE OF THIS SYNOPSIS IS TO GAIN KNOWLEDGE OF POTENTIALLY QUALIFIED SOURCES AND THEIR SIZE CLASSIFICATIONS (SMALL BUSINESS, LARGE BUSINESS, ETC.). PLEASE DO NOT REQUEST A COPY OF A SOLICITATION, AS ONE DOES NOT EXIST.  

1. Purpose.

This is a Request for Information in support of Market Research being conducted by the United States Air Force to identify potential sources for a contractor to provide all necessary labor, materials, equipment, and certified personnel to perform the removal, inspection, and attempt corrective repair of the seized Condenser Pump 2 and motor assembly. If the equipment is deemed repairable, the Contractor shall execute the repair and return the system to full operational status. The service is for the equipment located at Nellis Air Force Base.

Scope of Work

The contractor shall provide all necessary labor, parts, and expertise to perform at least one annual service visit. During this visit, the following tasks will be performed:

The Contractor shall provide all necessary labor, materials, equipment, and certified personnel to perform the removal, inspection, and attempt corrective repair of the seized Condenser Pump 2 and motor assembly. If the equipment is deemed repairable, the Contractor shall execute the repair and return the system to full operational status.

3.1 Conditional Replacement Clause. This requirement specifically authorizes the removal, inspection, and attempted repair of the seized components. If upon inspection, the Contractor determines that the pump or motor assembly is beyond economical repair and requires full replacement, the Contractor shall halt repair actions and submit a follow-on quote for Government approval prior to proceeding with replacement.

3.2 Specific Tasks. The Contractor shall perform the following specific labor and material tasks:

3.2.1 Site Prep & Safety.

3.2.1.1 Conduct mobilization and coordinate site access with 445 TS/EWJX facility managers.

3.2.1.2 Execute proper Lockout/Tagout (LOTO) procedures and ensure complete system isolation prior to beginning work.

3.2.2 Inspection & Diagnostics.

3.2.2.1 Safely remove the seized pump and motor assembly.

3.2.2.2 Inspect the unit and attempt to free the seized components to determine repairability.

3.2.3 Repair & Material Provision.

3.2.3.1 If repairable, perform bearing replacement labor.

3.2.3.2 Provide all necessary replacement materials, including motor bearings (as required), gaskets, seals, consumables, and miscellaneous installation hardware.

3.2.4 Testing & Restoration.

3.2.4.1 Reinstall the repaired pump and motor assembly.

3.2.4.2 Perform precise system alignment.

3.2.4.3 Conduct operational testing to verify the unit functions correctly under normal load conditions.

3.3 Warranty.

All work and parts shall be covered by a one-year warranty.

Deliverables

The contractor shall be responsible for delivery and installation support of all required materials.

Period of Performance

To Be Determined. Please submit your projected period of performance.

Other Miscellaneous

All work must be performed by experienced personnel who are qualified to perform the scope of work and meet the requirements of the SOW. 

3. Information requested.

The Government requests interested offerors that can fully support this requirement furnish the following information:

a. Company name, SAM Unique Entity ID (UEI) and Cage Code, address, points of contact, phone numbers and e-mail addresses.

b. Information should include a brief description of previous experience providing this type of service. The information package must be clear, concise, and complete. The Air Force is under no obligation to provide feedback to the company, or to contact the company for clarification of any information submitted in response to this request.

c. Identification of business size (small or large) and identify the socioeconomic disadvantaged category, as defined in RFO 19 and currently listed in the System for Award Management (SAM). Small business size standards are published by the U.S. Small Business Administration (SBA) and may be found at www.sba.gov/size/sizetable2002.html. The potential North American Industry Classification System (NAICS) codes assigned to this procurement is 811310 “Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance”. The Small Business Size Standard is $12,500,000.00.

d. Any other information deemed useful to the Air Force. Information packages should be limited to no more than 3 pages.

4.  Inquiries. Any qualified and interested companies responding to this announcement must be able to support all areas. NO partial support responses from industry will be accepted.

The due date and time for responses to this Request for Information is 4:00 PM Pacific Daylight Time on Friday 8 May 2026.

View original listing