SAM #36C24226Q0588

Brand-Specific Patterson-Kelley Water Heater Replacement for Lyons VA Medical Center

This procurement opportunity from the Department of Veterans Affairs seeks brand-specific water heater replacements for the Lyons VA Medical Center in New Jersey. - Government Buyer: - Department of Veterans Affairs, Network Contract Office 02 - Sub-agency: Samuel S. Stratton VA Medical Center, Contracting Office - OEMs and Vendors: - Patterson-Kelley (OEM for both water heater models) - Products/Services Requested: - Patterson-Kelley PK-08D Semi-Instantaneous Water Heater (1 unit) - Rated for 27 GPM domestic hot water (40-120F), 25 psig inlet steam, 5 psig in coil - Includes: solid copper nickel pressure vessel, factory insulation, double wall copper nickel tube bundle, bronze circulator pump, Spence pilot operated steam control valve, Wye strainer, ASME temperature & pressure relief valve, float & thermostatic condensate steam trap, auxiliary drip tap, drain valve, double solenoid high temperature limit system, vertical stand, vacuum breaker, dial thermometer, bundle steam pressure gauge, and electronic operation & maintenance manuals - Patterson-Kelley PK-10D Semi-Instantaneous Water Heater (1 unit) - Rated for 65 GPM domestic hot water (40-140F), 40 psig inlet steam, 25 psig in coil - Includes all features listed above, with two Spence steam control valves and two Wye strainers - Factory authorized start-up and training for both units, including electronic operation and maintenance manuals - Unique or Notable Requirements: - Brand-specific procurement: Only Patterson-Kelley models are acceptable to ensure compatibility with existing hookups - No additional piping modifications will be considered - All units must include specified accessories and features as listed - Factory authorized start-up and training is mandatory - Place of Performance: - Lyons VA Medical Center, 151 Knollcroft Road, Lyons, NJ 07939-5001

Description

Qty 1 Patterson-Kelley Model PK-08D Semi-Instantaneous Water Heater rated to provide 27 GPM of Domestic Hot Water from 40-120F when supplied with 25 psig Inlet Steam and 5 psig in the Coil @ 1122#/hr. Heater to be furnished with the following features and controls to meet the specified demand: - Solid Copper Nickel Pressure Vessel rated for 150 psi ASME working pressure. - Factory Insulation. - 90/10 Double Wall Copper Nickel Tube Bundle rated for 150 psi ASME working pressure and 210F test pressure. - All bronze circulator pump, 1/6HP, NYC Trim Package, 115v/1ph/60Hz, with isolation valves, ball and check valves, and venturi tees. - 1 ½ Spence Pilot Operated, Self-Contained Steam Control Valve. - 1 ½ Wye Strainer. - ¾ ASME Temperature & Pressure Relief Valve at 150 psi. - ¾ ASME Pressure Only Relief Valve (Shipped Loose). - 1 ½ Float & Thermostatic Condensate Steam Trap & Strainer (Shipped Loose). - ½ Auxiliary Drip Tap (Shipped Loose). - ¾ Drain Valve Factory Installed. - Double Solenoid High Temperature Limit System with pre-wired control box. - Vertical Stand suitable for removal of heating section without disconnection of domestic water lines. - ¾ Vacuum Breaker Factory Installed. - 3 ½ Dial Thermometer & Bundle Steam Pressure Gauge. - Operation & Maintenance Manuals in electronic form. - Factory Authorized Start-Up & Training Tags: 276458 (WH-2)

Qty 1 Patterson-Kelley Model PK-10D Semi-Instantaneous Water Heater rated to provide 65 GPM of Domestic Hot Water from 40-140F when supplied with 40 psig Inlet Steam and 25 psig in the Coil @ 3469#/hr. Heater to be furnished with the following features and controls to meet the specified demand: - Solid Copper Nickel Pressure Vessel rated for 150 psi ASME working pressure. - Factory Insulation. - 90/10 Double Wall Copper Nickel Tube Bundle rated for 150 psi ASME working pressure and 210F test pressure. - All bronze circulator pump, 1/6HP, NYC Trim Package, 115v/1ph/60Hz, with isolation valves, ball and check valves, and venturi tees. - 2 ½ Spence Pilot Operated, Self-Contained Steam Control Valve. - 2 ½ Wye Strainer. - 1 ASME Temperature & Pressure Relief Valve at 150 psi. - 1 ½ ASME Pressure Only Relief Valve (Shipped Loose). - 1 ½ Float & Thermostatic Condensate Steam Trap & Strainer (Shipped Loose). - ½ Auxiliary Drip Tap (Shipped Loose). - ¾ Drain Valve Factory Installed. - Double Solenoid High Temperature Limit System with pre-wired control box. - Vertical Stand suitable for removal of heating section without disconnection of domestic water lines. - ¾ Vacuum Breaker Factory Installed. - 3 ½ Dial Thermometer & Bundle Steam Pressure Gauge

.

View original listing