SAM #FA489726Q0010

Airfield Runway Rubber Removal, Crack Sealing, and Pavement Marking at Mountain Home Air Force Base

The U.S. Air Force at Mountain Home Air Force Base, Idaho, is seeking a contractor for comprehensive airfield maintenance services focused on runway rubber removal, crack sealing, and pavement marking. - Government Buyer: - Department of Defense, Department of the Air Force, Air Combat Command, Mountain Home Air Force Base, 366th Civil Engineer Squadron - Scope of Work: - Remove rubber from runways 30 and 12 (approx. 420,000 square feet) - Seal and repair cracks in asphalt shoulders, taxiways, and Live Ordnance Load Areas (LOLA C & D) - Crack sizes range from 1/4" to 4", with specific procedures for cracks over 1" (UFGS 32-01-17.61) - Use of backer rod and sealant as required - Stripe new instrument control and wing tip clearance markings (approx. 15,000 square feet) - Clean, restripe, and relocate apron edge lines, taxilane markings, and hold lines per UFC 3-260-04 standards - Paint row numbers, obliterate and repaint various lines, add boundary and clearance markings, and apply retro-reflective beads - Environmental protection and strict safety compliance required - Coordination with airfield operations; work scheduled during non-flying hours, nights, weekends, and holidays - Detailed submittals and weekly progress reports required - Products/Services Requested: - No specific OEMs or part numbers are listed; all materials and equipment must meet UFC/UFGS standards - Quantities include: - Rubber removal: 420,000 sf - Markings: 15,000 sf (instrument/wing tip), 25,500 sf (apron edge lines), 6,000 sf (various lines), 50,000 sf (crack sealing LOLA C), 5,000 sf (crack sealing LOLA C, larger cracks) - Unique Requirements: - 100% set aside for Women Owned Small Businesses (NAICS 237310) - Bid guarantees and performance/payment bonds required - Compliance with UFC 3-260-04 and UFGS 32-17-23 specifications - Use of deceptive marking paint and retro-reflective materials - Project management, safety, environmental, and security protocols - Place of Performance: - Mountain Home Air Force Base, Idaho, including runways, taxiways, aprons, hangar areas, and Live Ordnance Load Areas - Delivery and contracting offices located on base - **No OEMs or named vendors are specified; all materials must comply with federal standards.

Description

Project Description The work is described in the project SOW and contained within the Specifications herein. Work includes seal and repair of cracks in Asphalt Shoulders adjacent to Taxiway Alpha "A" and the Alpha Arm/Dearm Pad. Sealant will be applied to cracks 1/4" to 1" wide and will include a backer rod where needed. For cracks 1" wide and greater, follow procedures in UFGS 32-01-17.61, Sealing Cracks in Asphalt Paving, provided. Page 1 Deceptive Marking Paint

Location The work is located at the Mountain Home Air Force Base, ID, airfield. The exact locations are shown on the drawings/maps provided.

View original listing