SAM #FA302226Q0313

Cat-6 Premise Wiring Upgrade for Columbus Air Force Base Buildings 246 and 414

This opportunity involves upgrading premise wiring infrastructure to Cat-6 standards at Columbus Air Force Base, Mississippi, for Buildings 246 and 414. - Government Buyer: - U.S. Air Force, 14th Communications Squadron (14CS), 14CS/SCXP - Air Education and Training Command (AETC), 14th Contracting Squadron (FA3022 14 CONS LGCA) - OEMs and Vendors: - PANDUIT (specified for outlets and jacks) - No other OEMs or vendors explicitly named - Products/Services Requested: - Cat-6 TIA-568B 24 or 48 port patch panels (quantity not specified) - Cat-6 compliant cables and patch cords (approx. 36 cable/jacks: 24 in B246, 12 in B414) - PANDUIT outlets (off-white) and jacks (orange) - Cable management hardware (horizontal/vertical, blanking panels, shelving) - Cable support hardware (cable trays, risers, J-hooks, dropouts) - Engineering, furnishing, installation, and testing (EFI&T) of premise wiring upgrade - Removal and disposal of outdated cabling - Labeling, testing, coordination of outages, and project management - Unique/Notable Requirements: - Compliance with military and commercial standards - One-year warranty on installed infrastructure - Deliverables include as-built drawings and test reports - Coordination with 14th Communications Squadron/SCX for drop locations - Outlets and jacks must match existing base infrastructure for moves, adds, and changes (MAC) - Project set aside for SBA - Place of Performance: - Columbus Air Force Base, MS (Buildings 246 and 414) - Contracting office at 495 Harpe Blvd, Columbus, MS

Description

Columbus AFB has a requirement for the Contractor to engineer, furnish, install, and test (EFI&T) the upgrade of premise wiring infrastructure to Cat-6 for the building's 246 (B246) and 414 (B414) at Columbus AFB, MS.

B246: The Contractor shall install approximately 24 cable/jacks (12 DPLX) and coordinate with the 14th CS/SCX to verify for exact drop locations. Install 25pr./24ga. riser cable from MDF copper terminal [66 Block] to 24p PP (CAT III, 5 or 6) in LAN cabinet.   B414: The Contractor shall install approximately 12 cable/jacks (3 DPLX, 1 Quad, 2 wall drops) and coordinate with the 14th CS/SCX to verify the exact drop locations. Install 25pr/24ga riser cable from MDF copper terminal [66 block] to 24p PP in LAN cabinet.

View original listing