SAM #W91ZLK-26-R-A006

Army Solicitation for Chemical Resistant Epoxy Floor and Wall Repair at Aberdeen Proving Ground

The U.S. Army is seeking a contractor to repair and recoat floors and walls with chemical resistant epoxy at Aberdeen Proving Ground facilities, focusing on laboratory and chemical transfer areas: - Government Buyer: - U.S. Army Combat Capabilities Development Command Chemical Biological Center (DEVCOM-CBC) - Army Contracting Command (ACC) at Aberdeen Proving Ground - Scope of Work: - Repair and recoat floors and walls in the Sample Receipt Facility (Building E3401), Chemical Transfer Facility (CTF) sump area, secondary holding tank area, and select laboratories and storage rooms - Total area for recoating is approximately 2,498 sq. ft. across multiple rooms (SRF Rooms 134, 142, 143, 144, 146, Hallway to Room 134 Lab, and Indoor Dock Area) - Epoxy must be chemical resistant (organic solvents, strong acids, bases, oxidizers), durable for heavy equipment, and meet or exceed prior materials used in 2022 and 2024 - Application requires two coats with specified thickness (10 mil) and durability - All waste and dust generated must be captured and disposed of properly - Work to be performed during business hours, excluding federal holidays, with a one-year labor warranty - Unique/Notable Requirements: - Contractor must have recent (within five years) experience with similar epoxy services - Quality assurance surveillance and compliance with the Performance Work Statement (PWS) are mandatory - Project is a 100% Small Business Set-Aside under NAICS 238190 - Award will be made on a Lowest Price Technically Acceptable (LPTA) basis - No specific OEMs, brands, or part numbers are specified; epoxy must meet or exceed previous standards - All work is to be performed at Aberdeen Proving Ground, primarily in the Edgewood Area and the Sample Receipt Facility

Description

COMBINED SYNOPSIS/SOLICITATION

W91ZLK-26-R-A006.

This combined synopsis/solicitation is for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.  This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.  Incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2025-06 (27 August 2025).  The solicitation number for this request for proposal (RFP) is W91ZLK-26-R-A006.

This requirement is under the associated North American Industry Classification System (NAICS) Code 238190 – Other Foundation, Structure, and Building Exterior Contractors.  The Government contemplates award of a Purchase Order on a firm-fixed price (FFP) basis as a 100% Small Business Set-Aside in accordance with FAR 13, Simplified Acquisition Procedures. The period of performance is within (3) months from the date of award for the base requirement and (12) months for the option requirements.  This procurement will be evaluated as Lowest Price Technically Acceptable, for the procurement of the following services.

The Repair and Recoat of Floors and Walls with Chemical Resistant Epoxy (See Attachment 2 – Performance Work Statement).

Award will be made to the Offeror whose response to the Combined Synopsis/Solicitation represents the best value to the Government.  Proposals will be evaluated in accordance with the Lowest Price Technically Acceptable (LPTA) Source Selection process described in FAR 15.101-2.

All questions must be submitted via email to ike.a.wright2.civ@army.mil by Friday, May 08, 2026, at 4pm Eastern Time.  SUBJECT LINE: W91ZLK-26-R-A006. Q&A for Combined Synopsis/Solicitation FROM (INSERT COMPANY NAME).

Firm Fixed Price (FFP) proposals must be signed, dated, and received by Friday, May 22, 2026, at 4pm Eastern Time.  SUBJECT LINE: W91ZLK-26-R-A006. Proposal FROM (INSERT COMPANY NAME).  All additional questions will be answered via an amendment to the Combined Synopsis/Solicitation on www.SAM.gov.

The Contractor, as an independent party and not an agent of the Government, shall provide The Repair and Recoat of Floors and Walls with Chemical Resistant Epoxy of the Chemical Transfer Facility (CTF) sump area, secondary holding tank area, and select laboratories and storage rooms to ensure containment of any hazardous or aggressive chemicals, should there ever be a leak in the system.

Business hours are 7:00AM – 5:00PM Eastern Standard Time, Monday through Friday, excluding federal holidays.  All work to be performed will be inspected for compliance with performance requirements by the Contracting Officer’s Representative (COR).

SUBMISSION PROCEDURES FOR PROPOSAL:

52.212-1 Instruction to Offerors Commercial Items

This clause applies in its entirety and there are currently no addenda to the provision.

NO QUESTIONS FOR THE COMBINED SYNOPSIS/SOLICITATION WILL BE ACCEPTED VIA PHONE CALLS.

All proposals from responsible sources will be considered. Offerors who are not registered in the System for Award Management (SAM) database at the time of proposal will not be considered.  Offerors may register with SAM by calling 1-866-606-8220 or online at www.SAM.gov.

Offerors are cautioned to ensure that their proposals contain all necessary information and are complete in all respects as the Government does not intend to conduct discussions; therefore, proposals shall represent the best and final offer of the Contractor.

Proposals shall be submitted in two (2) separate volumes labeled:

Volume I: Epoxy Services W91ZLK-26-R-A006. TECHNICAL Proposal Volume II: Epoxy Services W91ZLK-26-R-A006. PRICE Proposal

Formatting. Single space Text Double Space Paragraphs 12-point minimum font size. Arial or New Times Roman fonts only.  Table/illustrations 8-point min and landscape is acceptable. Margins: All Margins 1 inch. Gutter: 0 inches Header and Footer 1.5 inches Page Size: Width 8.5 inches and Height 11 inches (11 X 17 folded pages are acceptable for tables/graphic representations; however, each 11X17 page counts as two pages) Page Limitations:  Volume I Technical – 5 pages limit and Volume II Price – unlimited pages. Plain Text Proposals (i.e., no identifying graphics, logo, watermarks, etc.)

NOTE: Pages that exceed the required page limitations will not be evaluated. Additional pages over the maximum allowed will be removed or not read and will not be evaluated by the Government.

Restrictions: All information shall be confined to the appropriate volume.  The Offeror shall confine submissions to essential matters and sufficiently define the proposal in a concise manner, to permit a complete and accurate evaluation of each proposal.  Proprietary information shall be clearly marked. The following shall be included in the volumes:

Volume I: Detail Technical Proposal shall be evaluated based on the following factors:

a.     Factor 1 - Technical Approach: The offeror’s proposal shall adequately describe and present a clear understanding of the requirements specified in the Performance Work Statement (PWS). To be rated as acceptable, offerors must provide documentation that demonstrates the offeror’s approach for meeting all of the requirements specified in the PWS.

b.     Factor 2 - Experience:  Contractor shall demonstrate the ability to repair and recoat the floors and walls with chemical resistant epoxy for the CTF sump area, secondary holding tank area, and select laboratories and storage rooms to ensure containment of any hazardous or aggressive chemicals, should there ever be a leak in the system as specified in the PWS.  To be rated as acceptable, the offeror must provide documentation to demonstrate recent experience repairing and recoating floors and walls with chemical resistant epoxy according to the PWS.  Recent experience includes epoxy services performed within five (5) years (i.e. previous Government contracts).

BASIS FOR AWARD:

The award will be made to one responsible offeror whose proposal is determined to be technically acceptable, and lowest priced.  To receive consideration for an award, an “Acceptable” rating must be achieved for all the non-cost evaluation factors: Technical Approach and Experience.  Price will be evaluated in accordance with FAR 15.404-1 Proposal analysis techniques.  Price will be the determining factor for proposals rated as acceptable for the non-cost factors. Price analysis using one or more methods listed under FAR 15.404-1(b) will be used to ensure that the proposal will result in a fair and reasonable price.

The contract will be awarded to the Lowest Priced Technically Acceptable (LPTA) offeror. The Government is not responsible for locating or securing any information which is not identified in the offer. The Government reserves the right to make an award without discussions

Volume II: Detailed Price Proposal to include the following elements:

Header Page Company Name, DUNS, CAGE, Business Type/Size, ETN# and point of contact information to include: Name, title, email address, and telephone number including extension.

INCLUDE ALL Information Below (An excel attachment will be provided to submit as a part of Volume II):

c      Offerors shall submit pricing in accordance with Pricing Schedule, Attachment 4. The resultant contract will be Firm Fixed Price with one (1) base year.

d      The Price Volume shall clearly identify the proposed firm-fixed prices in accordance with all services/labor, parts and material prices with all estimated totals for CLINs. Proposals shall be submitted in the provided CLIN structure, using Attachment 4 Pricing Schedule.

All submissions shall be made in U.S. dollars.

LIST OF ATTACHMENTS:

PROVISIONS/CLAUSES:  See Attachment 1 – Provisions/Clauses

PERFORMANCE WORK STATEMENT:  See Attachment 2 – Performance Work Statement

QUALITY ASSURANCE SURVEILLANCE PLAN (QASP):  See Attachment 3 – Quality Assurance Surveillance Plan

PRICE LIST:  See Attachment 4 – Price List (Use for Volume II – Detailed Price Proposal)

View original listing