SAM #W911S226U3116

Army Solicitation for Box Culvert System and Components at Fort Drum, NY

This opportunity from the Mission Installation Contracting Command (MICC) at Fort Drum, NY, seeks suppliers for a specialized box culvert system for military infrastructure: - Government Buyer: - Department of the Army, Mission Installation Contracting Command (MICC), Fort Drum, NY - Products/Services Requested: - 5' x 6' x 51.7' box culvert (approx. 57.1 lineal feet, 8 sections) - Cutoff walls for both ends of the culvert - Four L-shaped cantilever wingwalls (8 feet each) - Two headwalls (one at each end) - Neoprene gaskets pre-installed on each box section - Technical and Compliance Requirements: - Reinforced with Level 1 black bar - Must meet HL-93 Live Load Rating - Stamped by a Professional Engineer licensed in New York, with supporting engineering calculations - Drawings and submittals required - Must comply with UFC 3-310-08 standards - Exterior waterproofing will be performed by others (not included in this procurement) - OEMs and Vendors: - No specific OEMs or vendors are named in the solicitation - Notable Requirements: - All engineering documentation and compliance certifications must be provided - Delivery and installation requirements focus on pre-assembled gaskets and structural integrity - Place of Performance: - Fort Drum, NY (military base) - MICC Fort Drum contracting office

Description

5? wide x 6? high x 51.7? length Box Culvert to include: Approximately (57.1) Lineal feet of 5? (span) x 6? (rise) I.D. of Box Culvert (8sections).Cutoff Walls for (2) Culvert ends and (4) wingwalls. (4) L-shaped cantilever wingwalls 8?long. (2) Headwalls, one at each end 1? wide x 1? high on each end section. Neoprene gaskets will be installed on each box section prior to delivery. Exterior waterproofing by others. Level 1 black bar reinforcing carried. HL-93 Live Load Rating assumed (NY PE stamp w/ supporting Calculations provided). Class 100 Tracked and Class 120 Wheeled in accordance with UFC 3-310-08 in attached PDF. Drawings/submittals stamped by a PE licensed in NY with supporting engineering Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3116Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing