SAM #N6264926QJ010

Rental of 15,000 lb Heavy-Duty Diesel Forklift for Naval Air Facility Atsugi, Japan

NAVSUP Fleet Logistics Center Yokosuka, under the Department of the Navy, is seeking quotations for the rental of a heavy-duty diesel forklift for Naval Air Facility Atsugi Air Operations in Japan. - Government Buyer: - Department of the Navy - NAVSUP Fleet Logistics Center Yokosuka (NAVSUP FLC Yokosuka) - Contracting office: NAVSUP FLT LOG CTR YOKOSUKA - Products/Services Requested: - Rental of one (1) heavy-duty, diesel-powered forklift with a minimum load capacity of 15,000 lbs (7 tons) - Forklift must include: - 24-inch load center - Sit-down counterbalanced rider operation - Diesel engine - Cushion or solid/pneumatic tires suitable for concrete - Integrated side-shifter - 48-inch fork length - Oil-cooled wet disc brakes (or equivalent) - Maximum overall width: 82 inches - Maximum outer turning radius: 134 inches - Maximum collapsed height: 100 inches - Minimum lift height: 118 inches - Contractor must provide all equipment, transportation, and maintenance - Maintenance and repair response times must comply with the Performance Work Statement (PWS) - Unique/Notable Requirements: - Vendors must be authorized to operate and do business in Japan (DFARS 252.225-7042 compliance) - Compliance with Japanese tax exemptions and security protocols - Firm fixed pricing - No specific OEMs or vendors are named in the solicitation. - Place of Performance: Naval Air Facility Atsugi, Japan; Contracting office at NAVSUP FLC Yokosuka.

Description

15,000lb Heavy-Duty Forklift Rental - Naval Air Facility (NAF) Atsugi Air Operations (Air Ops)

The Contractor shall provide all equipment, transportation, and maintenance required for the rental of one (1) heavyduty, diesel-powered forklift meeting or exceeding the minimum specifications listed below.

Minimum Load Capacity- 15,000 lbs (6,804 kg) Load Center- 24 inches (610 mm) Operation Type- Sit-Down, Counterbalanced Rider Fuel Type / Power- Diesel Engine Tire Type- Cushion or Solid/Pneumatic (Suitable for concrete operation) Required Attachments- Integrated Side-Shifter Standard Fork Length- 48 inches (1,219 mm) Brakes- Oil-Cooled Wet Disc (or equivalent heavy-duty braking system) Maximum Overall Width- 82.0 inches (2,082 mm) Maximum Outer Turning Radius- 134.0 inches (3,404 mm) Maximum Collapsed Height- 100 inches (2,540 mm) Minimum Lift Height- 118 inches (3,000 mm)

NOTICE TO QUOTERS 1. This is a competitive action restricted to sources duly authorized to operate and do business in JAPAN, in accordance with DFARS 252.225-7042, Authorization to Perform.

2. Quoters are advised that the aforementioned provision is incorporated by reference in DFARS 252.204-7998, Alternate A, Annual Representations and Certifications. (DEVIATION 2026-O0043). Please review all clauses and provisions to ensure full compliance prior to submitting a quotation.

3. Quoters are required to submit their quotation via E-mail to Jon R. Miller at jon.r.miller17@us.navy.mil no later than 11:00 AM Japan Standard Time, Tuesday, 5 May 2026.

4. A complete quotation must consist of the following: A signed and completed SF 1449 (Solicitation No. N6264926QJ010), including acknowledgement of all amendments, to include: -Page 1 - Blocks 17a, 30a, 30b, and 30c on Page 1 filled out completely -Pages 3-4 - Unit and total pricing for the following line items CLIN 0001 - (Base Period - 6 Months) CLIN 1001 - (Option Period - 1 Month)

5. Official Company Quotation Form. The quoter must provide a separate quotation form

6. Maintenance Service Explanation (If Applicable): The Government's minimum maintenance and repair response times are outlined in PWS Section 4.2. If the quoter's standard commercial maintenance policy differs from the PWS (e.g., different response times, different procedures for replacement units), the quoter must submit a brief written explanation of their standard commercial maintenance terms. If no explanation is provided, the Government will assume the quoter agrees to comply fully with the PWS as written. By signing and submitting a quotation in response to this solicitation, the quoter is confirming that it has read, understands, and agrees to comply with all minimum specifications and performance requirements detailed in the Performance Work Statement (PWS) in Section C.

View original listing