CanadaBuys #BC228416

District of Taylor Solicits Design and Construction of Potable Water Filter System

The District of Taylor, a municipal government in British Columbia, is seeking proposals for a new Potable Water Filter System. - Government Buyer: - District of Taylor, British Columbia, Canada - OEMs and Vendors: - ATEC (referenced as the existing system's OEM) - Products/Services Requested: - Design and construction of one Potable Water Filter System - Must remove Iron and Manganese - Must reduce water turbidity below 1.0 NTU - Flow rate requirement: 500-700 imperial gallons per minute - System must fit through a 2.9m high by 3m wide door - Approximate system dimensions: 5.2m long, 1.4m wide, 2.6m high - Replacement for existing ATEC Model 04-60-48 Iron & Manganese Filter (four 48-inch diameter vessels, 60-inch sidewalls, header piping, valves, media, automatic backwash control) - Unique/Notable Requirements: - System must comply with all BC Drinking Water standards - Delivery and installation at Taylor, BC - No specific OEM required, but ATEC is referenced as the current system

Description

This solicitation is for the design and construction of one Potable Water Filter System. The system should measure approximately 5.2m long by 1.4m wide by 2.6m high and fit through a 2.9m high by 3m wide door. It must produce potable water meeting all BC Drinking Water standards, primarily removing Iron and Manganese and reducing turbidity below 1.0 NTU. The system will handle between 500-700 imperial gallons per minute and will replace an existing ATEC Model 04-60-48 Iron & Manganese Filter system. The final deliverable is the design, construction, and delivery of the system to Taylor, British Columbia, Canada.

View original listing