SAM #W911WN26Q1BLB

USACE Pittsburgh District Seeks Ready Mixed Concrete Suppliers for BPA

The U.S. Army Corps of Engineers (USACE), Pittsburgh District, is seeking sources for a Blanket Purchase Agreement (BPA) to supply ready mixed concrete to its facilities across Pennsylvania, Ohio, and West Virginia. - Government Buyer: - U.S. Army Corps of Engineers (USACE), Pittsburgh District (Department of Defense, Department of the Army) - Products/Services Requested: - Supply and delivery of various ready mixed concrete types, including: - DOT Class A, AA, AAA - Self-consolidating concrete - High-early strength concrete - Underwater concrete - Structural grouts - Provisions for: - Cold and hot weather concreting - Use of accelerants, retarders, and super plasticizers - Evening and weekend deliveries - Mix design adjustment for haul time and weather - Certification testing and mix refinement as needed - Concrete must be discharged within 45 minutes of batching unless otherwise approved - OEMs and Vendors: - No specific OEMs or vendors are named in the notice - Unique/Notable Requirements: - Rapid-response delivery to 22 navigation locks and dams, 16 flood-damage reduction reservoirs, a remote operations site, and maintenance/repair facilities - Compliance with all applicable laws and standards - Mix design and certification testing may be required - Quantities and specific batch mixes will be determined per individual BPA Calls - No set-aside determination has been made - Periods of performance will be negotiated at the BPA Call level - Place of performance includes multiple federal facilities across three states

Description

BLANKET PURCHASE AGREEMENT

Concrete Supply

U.S. ARMY CORPS OF ENGINEERS

PITTSBURGH DISTRICT

The U.S. Army Corps of Engineers (USACE), Pittsburgh District, is conducting market research in accordance with Revolutionary FAR Overhaul (RFO) Part 10 to determine the availability of qualified sources capable of delivering ready mixed concrete. 

The Pittsburgh District jurisdiction includes 22 navigation locks and dams and 16 multi-purpose flood-damage reduction reservoirs, a remote operations site and a maintenance and repair facilities in Pennsylvania, Ohio and West Virginia.  The intent of the BPA is to provide the Government with a cost-effective rapid-response method to supply the facilities within the U.S. Army Corps of Engineers (USACE) Pittsburgh District.  Specific batch mixes and quantities will be requested through purchases made under this BPA that shall be referred to as Calls. 

The Contractor shall supply concrete delivered to USACE navigation projects in the Pittsburgh District. Mixes may include, but are not limited to, DOT Class A, AA, and AAA, self-consolidating, high-early, and underwater concretes, as well as structural grouts. Deliveries may include provisions for cold weather, hot weather, accelerants, retarders, super plasticizers, and evening and weekend deliveries. Mix design, refinement, and certification testing may be required.  Further requirements may be specified for each separate BPA Call.  

Concrete shall be discharged at the delivery point within 45 minutes of batching, unless otherwise approved by the Government. Requests for extended delivery times shall be supported by the Contractor’s proposed mix design, use of admixtures (e.g., retarders or hydration stabilizers), and supporting documentation demonstrating that the concrete will meet all specified performance requirements at time of placement.

The Contractor shall be responsible for adjusting mix designs as necessary to account for haul time, ambient weather conditions (hot and cold weather), and project-specific placement requirements, including evening and weekend deliveries.

Note: This is not a solicitation. This is a Sources Sought Notice (SSN) for planning purposes only.  The information obtained from responses to this SSN may be used in the development of an acquisition strategy and future solicitation.  No contract will be awarded based on the SSN nor any reimbursement made for information submitted.

Periods of Performance will be negotiated at the Call level.

No set-aside determination has been made at this time.

The contractor shall furnish all labor, equipment, devices, and materials and perform all work in accordance with the specifications.

The contractor shall comply with all applicable federal, regional, state, and local laws and commercial standards.

The above description of work is for general information only and is not intended to include or describe every feature of the work or to define the complete scope of the work.

RESPONSE PROCEDURE To assist with planning, the GOV requests interested contractors submit the following by 10:00 AM ET, 6 May 2026:

1: A capability statement

2. The name and address of your batch plant.

Firms that meet the requirements described in this announcement are invited to submit their documentation to the attention of Aaron Barr, Contract Specialist, at aaron.m.barr@usace.army.mil , and copy Miriaha Sigmon, Contracting Officer, at Miriaha.D.Sigmon@usace.army.mil

View original listing