SAM #15B50526PR000263

Prefabricated ADA-Compliant Powerhouse Bathroom Construction at FMC Carswell, Fort Worth, TX

This opportunity involves the construction of a prefabricated, ADA-compliant Powerhouse Bathroom at FMC Carswell, a federal medical facility in Fort Worth, Texas. - Government Buyer: - Federal Bureau of Prisons (FBOP), Department of Justice - Sub-agency: Federal Medical Center Carswell - OEMs and Vendors: - No specific OEMs or vendors are named in the documentation - Products/Services Requested: - Construction of a single-use, 8'x8' exterior restroom - Prefabricated bathroom with Class A exterior walls rated for 115 mph wind loads - 3" thick composite sandwich panels with 24-gauge galvanized steel facings - 20-gauge insulated steel flush door (36"w x 84"h x 1 3/4" thick) with hardware - 12 linear feet of OSB for fixture mounting - White china water closet (toilet) and lavatory sink with installation kits - Electrical package: #12 Ga copper wiring in 1/2" EMT, wall switch, duplex receptacle, exterior LED flood fixture, LED ceiling light, pre-wired to load center - 125 AMP single phase 120/240 volt load center (up to 8 spaces) - Installation instructions required; final plumbing and electrical tie-ins by others - Unique or Notable Requirements: - Prefabricated structure must meet ADA compliance and Class A exterior wall standards - All materials and components must be included; installation instructions required - Contractors must be registered in SAM.gov with NAICS code 332311 (Prefabricated Metal Building and Component Manufacturing) - Place of Performance: - FMC Carswell, J Street Bldg 3000, Fort Worth, TX 76127

Description

THIS IS A SOURCES SOUGHT NOTICE. THIS NOTICE IS ISSUED FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION OR INVITATION FOR OFFERORS TO SUBMIT QUOTES.

PLEASE DO NOT RESPOND TO THIS NOTICE IF YOU ARE NOT SERIOUSLY INTERESTED AND IF YOU DO NOT PERFORM THIS REQUIREMENT. IT WILL DELAY THE POSTING OF THE SOLICITATION DUE TO FURTHER MARKET RESEARCH THAT WILL BE REQUIRED.

Interested contractors are requested to respond to this notice by filling out and emailing completed questionnaire attachment to Angel Rivera Martinez email: a3rivera@bop.gov.  Responses must be received no later than May 8, 2026 @ 3:00pm CDT.  Interested vendors must also add their names to the Interested Vendors List for this posting in www.sam.gov Contract Opportunity (must be logged-in to your vendor account).

The Federal Bureau of Prisons (FBOP) anticipates issuance of a solicitation for the award of a firm-fixed-price contract for a project entitled Construct Powerhouse Bathroom, at the Federal Medical Center - Carswell (FMC Carswell), located in Fort Worth, Texas.

FMC Carswell is a federally owned facility located at J STREET BLDG 3000., FORT WORTH, TEXAS, 76127.  The project consists of the following: the provision of all necessary materials to Construct Powerhouse Bathroom and related components.

FMC Carswell is a United Stated federal prison for female inmates.

See the specifications attachment for the complete requirements.

The North American Industrial Classification System (NAICS) code applicable to this requirement is 332311 with a corresponding small business size standard of 750 employees. To be considered an interested vendor, you must possess this NAICS code in your www.sam.gov registration.

Interested contractors must be registered in www.sam.gov.

Attachments referenced in section D of the specifications are available upon request.

View original listing