SAM #273FCC26Q0004

FCC OET Laboratory Annual Calibration of Keysight and Anritsu Test Equipment

The Federal Communications Commission (FCC) Office of Engineering & Technology (OET) Laboratory Division is seeking an accredited vendor for annual calibration services of high-frequency test and measurement equipment. - Government Buyer: - Federal Communications Commission (FCC), Office of Engineering & Technology (OET), Laboratory Division - OEMs (Original Equipment Manufacturers): - Keysight Technologies - Anritsu - Products/Equipment to be Calibrated: - Keysight 110 GHz Signal Analyzer (P/N P023609) – Qty: 1 - Keysight 120 GHz USB Power Sensor (P/N P023610) – Qty: 1 - Keysight 10 MHz to 26.5 GHz Network Analyzer (P/N P023620) – Qty: 1 - Keysight Millimeter Wave Test Controller (P/N P023621) – Qty: 1 - Keysight 110 GHz Frequency Extender Heads (P/Ns P023622, P023623, P023624) – Qty: 6 total - Keysight 1mm Precision Calibration Kit (P/N P023617) – Qty: 1 - Keysight 2-port 67 GHz E-Cal Module (P/N P023619) – Qty: 1 - Keysight UXM 5G Wireless Test Platform (P/N P023660) – Qty: 1 - Keysight Common Interface Unit (P/N P023662) – Qty: 1 - Keysight mmWave Transceivers for 5G (P/Ns P023663, P023664) – Qty: 2 - Keysight UXR 110 GHz Oscilloscope (P/N P023637) – Qty: 1 - Anritsu Radio Communications Test Station MT8821C (P/N P233488) – Qty: 1 - Anritsu Radio Communications Test Station MT8000 (P/N P233489) – Qty: 1 - Services Requested: - Annual calibration of all listed equipment - Pickup, offsite calibration, and return delivery - Calibration must comply with ISO/IEC 17025 standards and OEM specifications - Maximum turnaround time of 60 calendar days - Unique/Notable Requirements: - Vendor must be ISO/IEC 17025 accredited for test equipment calibration - Firm fixed-price, non-personal services contract - Calibration intervals vary by equipment (12, 24, or 36 months as specified) - Place of Performance & Delivery: - FCC OET Laboratory, 7435 Oakland Mills Road, Columbia, MD 21046 - FCC Warehouse, 9050 Junction Drive, Annapolis Junction, MD 20701

Description

The objective of this procurement is to obtain an annual calibration agreement for the listed equipment listed in Section 7. These calibration services will be provided by accredited test equipment calibration vendor(s) to support FCC OET Laboratory testing requirements.  The Combined Synopsis/Solicitation is attached

View original listing