Opportunity
Saskatchewan Tenders #RM1552026RoadContr
Road Construction and Clay Capping Project – Rural Municipality of Wolseley No. 155, Saskatchewan
Posted
April 20, 2026
Respond By
May 08, 2026
Identifier
RM1552026RoadContr
NAICS
237310, 237990
This opportunity involves a major road construction project for the Rural Municipality of Wolseley No. 155 in Saskatchewan: - Government Buyer: - Rural Municipality of Wolseley No. 155 (Saskatchewan, Canada) - Scope of Work: - Clay capping of approximately 3.5 miles of road - Removal and replacement of multiple culverts (various sizes and types) - Municipality supplies all culverts; contractor installs them - Includes culvert extensions and riprap placement (riprap supplied and installed by contractor) - Placement of approximately 45,600 cubic meters of clay material - Additional work: rock removal, compaction, ditch reshaping, and associated roadwork - Products and Quantities: - Multiple culverts (500mm, 600mm, 800mm, 900mm, 2400mm diameters; various lengths) - Culvert extensions (18in plastic, 600mm, 2400mm) - 45,600 cubic meters of clay material for road capping - Unique Requirements: - Contractors must provide proof of COR safety certification - Use of approved road building software (Trimble, Leica, or Topcon GPS) - $5 million general liability insurance required - Must be fully bondable for bid and performance bonding - Mandatory site visit prior to tender submission - No specific OEMs or vendors are named; however, road building software must be from Trimble, Leica, or Topcon - Place of Performance: - Road sections north of Section 31-17-08 W2, west through to north of Section 35-17-09 W2, and north/east of SE 02-18-09 W2 (Divisions 4 & 5, approx. 3.5 miles) - Contracting office: Rural Municipality of Wolseley No. 155, 500 Front Street, Wolseley, SK, S0G 5H0
Description
The Rural Municipality of Wolseley No. 155 is inviting tenders for clay capping approximately 3.5 miles of road, including removal and replacement of various culverts and associated roadwork. The project requires clay capping to a 7.6 meter road top with specific crown and side slopes, with an estimated 45,600 cubic meters of clay material. Contractors must ensure rock removal, compaction, riprap placement, ditch reshaping, and other related tasks. The municipality will supply culverts, while the contractor supplies riprap and must meet safety and bonding requirements.