SAM #A25-025

Air Force BPA for 3M 401+ Masking Tape (Multiple Sizes)

This opportunity involves a five-year Blanket Purchase Agreement (BPA) for 3M 401+ masking tape to support the Air Force Sustainment Center at Tinker Air Force Base. - Government Buyer: - Air Force Materiel Command, Air Force Sustainment Center (FA8125 AFSC PZIMA) - Contracting office located at Tinker AFB, Oklahoma - OEM (Original Equipment Manufacturer): - 3M (sole specified manufacturer) - Products Requested: - 3M 401+ Masking Tape in four sizes: - 24mm (1 inch) x 55m (60 yards) - 48mm (2 inch) x 55m (60 yards) - 76mm (3 inch) x 55m (60 yards) - 12mm (1/2 inch) x 55m (60 yards) - All tapes must: - Meet SAE AMS-T-21595 (formerly MIL-T-21595) Types 1 and 2 - Be single-sided with a natural/synthetic rubber adhesive blend - Have crepe paper backing - Meet specified adhesive and tensile strength per ASTM standards - Be green in color - Be capable of high temperature use (minimum 249°F for 30 minutes) - Have at least six months of shelf life upon delivery - Unique Requirements: - Only 3M 401+ meets the agency's performance and cost-effectiveness needs for the 569th corrosion control program - Small business set aside; no foreign participation allowed - NAICS code: 325520 - Place of Performance: - Tinker Air Force Base, Oklahoma - Delivery and performance at federal facility

Description

THIS IS THE PRE-SOLICITATION NOTICE.  THE ACTUAL SOLICITATION WILL BE RELEASED AT A LATER DATE

The Air Force intends to solicit the following supply:

The 76 AMXG/569 AMXS is requesting a five (5) year Blanket Purchase Agreement (BPA) for 3M 401+ masking tape.

The requested equipment description/specifications are outlined below.

a.Item one – Masking Tape 24mm (1 inch) x 55m (60 yards)

b.Item two - Masking Tape 48mm (2 inch) x 55m (60 yards)

c.Item three - Masking Tape 76mm (3 inch) x 55m (60 yards)

d.Item four – Masking Tape 12mm (1/2 inch) x 55m (60 yards)

All tapes listed in item two shall adhere to the following requirements:

a.Tape shall adhere to SAE AMS-T-21595 (formerly MIL-T-21595). Types 1,2

b.Tape shall be single-sided and have a natural/synthetic rubber adhesive blend

c.Tape backing shall be a crepe paper.

d.Tape shall have an Adhesive strength of 35oz/in- 50oz/in per ASTM D3330.

e.Tape shall have a minimum tensile strength of 24lb/in per ASTM D3759.

f.Tape shall have a minimum elongation of 14% per ASTM D3759.

g.Tape shall be capable of high temperature use and be rated for a minimum surface temperature of 249F for 30 minutes

h.Tape color shall be green.

Tape shall be delivered with a minimum of six (6) months of shelf life remaining.

Estimated Period of Performance:  5-year BPA

This is a small business set-aside

System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 325520 with a size standard of 550 EMP.

Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home.  No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).

Foreign Participation: No

For further information contact:

Sheridan Robison

Contracting Officer

View original listing