Opportunity
Milton Independent School District Civicplus #RFP - 2026 Milton Maplewood Ave. Pump Station Access Road Paving
Town of Milton Seeks Contractors for Maplewood Ave. Pump Station Access Road Paving Project
Posted
April 08, 2026
Respond By
May 01, 2026
Identifier
RFP - 2026 Milton Maplewood Ave. Pump Station Access Road Paving
NAICS
237310, 238910
The Town of Milton Department of Public Works in Vermont is seeking qualified contractors for the 2026 Maplewood Ave. Pump Station Access Road Paving Project. - Government Buyer: - Town of Milton Department of Public Works, Milton, Vermont - Project Scope: - Reclaim 10–12 inches of the existing access road (approx. 500 feet long, 13 feet wide) - Add 6 inches of gravel subbase (VTrans Spec 704.05: Crushed Gravel for Subbase) - Pave with 2.5 inches of Type II asphalt base and 1.5 inches of Type IV asphalt wearing course - Ensure a 2% crown slope for drainage - Estimated Quantities: - 725 square yards of full depth reclamation - 110 tons of Type II asphalt base - 61 tons of Type IV asphalt wearing course - 8 tons of Type II asphalt base (pull out) - 5 tons of Type IV asphalt wearing (pull out) - 120 cubic yards of gravel (VTrans Spec 704.05) - Requirements: - Contractors must have experience with similar paving projects - Must provide a list of equipment and personnel - Proper licensing in Vermont is required - All work must comply with local, state, and industry standards - 5% bid bond required - No specific OEMs or vendors are named; the opportunity is open to all qualified contractors meeting the requirements - Place of Performance: - 43 Bombardier Road, Milton, Vermont 05468 (Town of Milton Department of Public Works)
Description
The Town of Milton is soliciting proposals from qualified contractors for the 2026 Maplewood Ave. Pump Station Access Road Paving Project. The project scope includes reclaiming 10 to 12 inches of the access road, adding 6 inches of gravel to elevate the road, and paving with 2.5 inches of Type II asphalt and 1.5 inches of Type IV asphalt, with a 2% crown slope for drainage. The work covers approximately 500 feet of access road, about 13 feet wide, and must be completed by June 30, 2026. Contractors must demonstrate relevant experience and comply with all local and state regulations.