Opportunity
SAM #W50S7E26Q0001
Sources Sought: M-B Companies Auger Components for Oshkosh H293BCZ-GAFC Snow Blower
Buyer
USPFO Activity MNANG 133
Posted
April 10, 2026
Respond By
April 26, 2026
Identifier
W50S7E26Q0001
NAICS
333120, 336999, 332999
This sources sought notice from the Department of Defense, Department of the Army, National Guard Bureau (W7NG USPFO Activity MNANG 133) seeks potential suppliers for M-B Companies-manufactured auger components for an Oshkosh H293BCZ-GAFC Snow Blower. - Government Buyer: - Department of Defense, Department of the Army, National Guard Bureau - W7NG USPFO Activity MNANG 133 (Saint Paul, Minnesota) - OEM Requirement: - All parts must be manufactured by M-B Companies - No substitutions or equivalents accepted - Standard manufacturer's warranty of at least 12 months required - Products Requested (M-B Companies parts only): - Tires (1 each) - Skid pads (2 each, PN: 2159050W) - Blade (1 each, PN: 2159000) - Special plow bolts (12 each, PN: 3620192) - Flange nuts, locking (12 each, PN: 3266311; 144 each, PN: 3970540005) - Spokes, LH and RH, removable weldments (4 each, PN: 5854034 and 5854035) - Brackets, auger spoke weldment (8 each, PN: 3557068) - Ribbon flights, inside/outside, LH/RH (4 each per type, PNs: 3561863, 3561864, 3561865, 3561866) - Curb rings, LH/RH (4 each, PNs: 183610, 1882760) - Plates (8 each, PN: 1929280) - Flat head cap screws (64 each, PN: 370-28984) - Flange hex head cap screws (24 each, PN: 370-148014) - Square neck carriage screws (48 each, PN: 3561867) - Notable Requirements: - All items must match specified part numbers - No services are requested; product supply only - Place of Performance/Delivery: - Fort Snelling, Minnesota (ZIP 55111) - Contracting office: W7NG USPFO ACTIVITY MNANG 133, 610 Militia Dr, Saint Paul, MN 55111-4112
Description
Request for Information (RFI)
Snow Blower Auger Components
1. General Scope
This RFI is issued to identify potential sources capable of providing auger attachment components as described in the detailed requirements below. The parts required are for an Oshkosh H293BCZ-GAFC Snow Blower. Parts must be manufactured by M-B Companies as noted below.
2. Detailed Requirements
The Government is seeking responses from vendors capable of providing the following components:
A. Tire: Qty 1
- Nominal width in mm: 180
- Aspect ratio: 70
- Radial
- Rim diameter in inches: 8
- 16 PLY WITH TUBE & FLAP
B. Skid Pad: Qty 2 (MB attachment specific)
- Mfg Part Number: 2159050W
C. Blade: Qty 1 (MB attachment specific)
- Mfg Part Number: 2159000
D. Bolt: Qty 12
- Special Plow Bolt
- Diameter: 5/8 inch
- 11 threads per inch (TPI)
- Length: 2.25 inch
- Grade: 5
- Dark finish
- Mfg Part Number: 3620192
E. Nut: Qty 12
- Flange nut (Locking)
- Diameter: 5/8 inch
- 11 threads per inch (TPI)
- Grade: 8
- Dark finish
- Mfg Part Number: 3266311
F. Spoke (LH): Qty 4 (MB attachment specific)
- SPOKE, REMOVABLE, LH, APRT, WLDMT
- Mfg Part Number: 5854034
G. Spoke (RH): Qty 4 (MB attachment specific)
- SPOKE, REMOVABLE, RH, APRT, WLDMT
- Mfg Part Number: 5854035
H. Bracket: Qty 8 (MB attachment specific)
- BRKT, AUGER SPOKE, WELDMENT
- Mfg Part Number: 3557068
I. Ribbon (RH, Outside): Qty 4 (MB attachment specific)
- RIBBON FLIGHT, OUTSIDE, RH
- Mfg Part Number: 3561865
J. Ribbon (RH, Inside): Qty 4 (MB attachment specific)
- RIBBON FLIGHT, INSIDE, RH
- Mfg Part Number: 3561863
K. Ribbon (LH, Outside): Qty 4 (MB attachment specific)
- RIBBON FLIGHT, OUTSIDE, LH
- Mfg Part Number: 3561866
L. Ribbon (LH, Inside): Qty 4 (MB attachment specific)
- RIBBON FLIGHT, INSIDE, LH
- Mfg Part Number: 3561864
M. Ring (RH): Qty 4 (MB attachment specific)
- CURB RING, RH
- Mfg Part Number: 1882760
N. Ring (LH): Qty 4 (MB attachment specific)
- CURB RING, LH
- Mfg Part Number: 183610
O. Plate: Qty 8 (MB attachment specific)
- PLATE 9.00X4.50X.250
- Mfg Part Number: 1929280
P. Flat Head Cap Screw (Bolt): Qty 64
- Diameter: 5/8 inch
- 11 threads per inch (TPI)
- Length: 2 inch
- Grade: 8
- 82-degree head angle
- Plain black oxide finish
- Mfg Part Number: 370-28984
Q. Nut: Qty 144
- Flange nut (Locking)
- Diameter: 5/8 inch
- 11 threads per inch (TPI)
- Grade: 8
- Matte black finish
- Mfg Part Number: 3970540005
R. Flange Hex Head Cap Screw (Bolt): Qty 24
- Diameter: 5/8 inch
- 11 threads per inch (TPI)
- Length: 1.25 inch
- Grade: 8
- Phosphate and oil finish
- Mfg Part Number: 370-148014
S. Square Neck Carriage Screw (Bolt): Qty 48
- Diameter: 5/8 inch
- 11 threads per inch (TPI)
- Length: 2 inch
- Grade: 8
- Mfg Part Number: 3561867
Warranty: Manufacturer's standard warranty for at least 12 months.
3. Responses
Interested vendors are requested to submit a Capabilities Statement that provides sufficient detail to determine the organization’s ability to meet the Government’s requirements. Please include the following information:
### Product Information:
- Availability of requested items or equivalent items.
- Product description or catalog copy.
- Manufacturer, model, and type.
- Approximate lead time for each item.
### Company Information:
- Company name.
- Cage Code and Unique Entity ID (UEI).
- NAICS codes registered in the System for Award Management (SAM).
- Point of contact (name, phone number, email address).
Responses should be submitted no later than 21 April 2026, 15:00 (Central Standard Time) via email to the Government Point of Contact (POC) listed below.
Government POC
- Name: Lt Col Ann Feist
- Email: ann.feist.1@us.af.mil
- Phone: 612-713-2626
4. Disclaimer
This is a Sources Sought Notification (SSN) issued for informational and planning purposes only. It does not constitute a Request for Quote (RFQ) or a promise to issue an RFQ in the future. This RFI does not commit the Government to contract for any supply or service.
The Government will not reimburse respondents for any costs incurred in responding to this RFI. Failure to respond to this RFI does not preclude participation in any future solicitation. If a solicitation is issued, it will be announced on the System for Award Management (SAM) website at https://sam.gov. Vendors are responsible for monitoring SAM for any updates related to this requirement.