SAM #W911S226U3002

Army Solicitation for QPL-Qualified DI (2-Ethylhexyl) Adipate (DOA) for McAlester Army Ammunition Depot

This opportunity involves the Army's procurement of DI (2-Ethylhexyl) Adipate (DOA) for use at McAlester Army Ammunition Depot in Oklahoma. - Government Buyer: - Department of Defense, Department of the Army - Mission Installation Contracting Command (MICC), Fort Drum - OEMs and Vendors: - BASF Corporation (Plastomoll DOA) - Eastman Chemical Company (Eastman DOA Plasticizer) - Hatco Corporation (Hatcol 2908) - Products/Services Requested: - DI (2-Ethylhexyl) Adipate (DOA), 425 lbs per 55-gallon drum - Must comply with MIL-DTL-23443C - Only QPL-qualified products from the listed OEMs are acceptable - Multiple deliveries of 40,800 lbs each - Unique or Notable Requirements: - Strict compliance with MIL-DTL-23443C and QPL qualification - Required documentation: Certificates of Analysis, Certificates of Conformance, Safety Data Sheets - Strict labeling and documentation for each delivery - Only products from BASF, Eastman, or Hatco are acceptable - Delivery Location: - McAlester Army Ammunition Depot, Oklahoma - Contracting Office: - MICC Fort Drum, New York

Description

DI (2-ETHYLHEXYL) ADIPATE-COMMONLY CALLED DOA425 LBS PER 55-GAL DRUM MATERIAL MUST BE IN ACCORDANCE WITH (IAW) MIL-DTL-23443C, AND MANUFACTURERS MUST BE QUALIFIED WITHIN MCAAP PHAMPLET 702-13 QUALIFIED CHEMICALS. CERTIFCATE OF ANALYSIS CERTIFCATE OF CONFORMANCE AND SAFETY DATA SHEET ARE REQUIRED. COC/COA MUST INCLUDE MANUFACTURER NAME PRODUCT NAME/DESCRIPTION SPECIFICATION LOT/BATCH NUMBER MANUFACTURE/EXPIRATION DATE STATEMENT OF NO CHANGE IN MATERIALS OR PROCESSES AND SIGNATURE OF AUTHORIZED REPRESENTATIVE. PACKAGING LABELS WILL INCLUDE MANUFACTURER NAME PRODUCT NAME/DESCRIPTION LOT/BATCH NUMBER AND MANUFACTURE/EXPIRATION DATE COC/COA APPROVAL BY MCAAP AO REQUIRED BEFORE CONTRACT AWARD. SEE PAGE 2 FOR QPL-QUALIFIED PRODUCTS LIST AND DOA CERTIFICATE OF ANALYSIS TEST REQUIREMENTS. QPL-QUALIFIED PRODUCTS LIST:PRODUCT: MANUFACTURER:PLASTOMOLL DOA BASF CORPORATION EASTMAN DOA PLASTICIZER EASTMAN CHEMICAL COMPANYHATCOL 2908 HATCO CORPORATION DOA CERTIFICATE OF ANALYSIS TEST REQUIREMENTS:ATTRIBUTE: REQUIREMENT:SPECIFIC GRAVITY AT 25/25 � C 0.921 MIN. - 0.929 MAX.MOISTURE, WT.% 0.05 MAX.ACIDITY, WT% (ACETIC) 0.01 MAX.SAPONIFICATION NUMBER 300 MIN. ? 304 MAX.FLASH POINT, � C 196 MIN.FIRE POINT, � C 216 MIN.KINEMATIC VISCOSITY, 38 � C, mm2 /s 8.00 MIN. - 8.76 MAX.PREDICTED DELIVERY SCHEDULE AS FOLLOWS. 40800 LBS PER DELIVERY ON THE FOLLOWING DATES: 5/13/26, 5/20/26, 6/3/26, 6/10/26 Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3002Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing