SAM #W911PT26QA034

U.S. Army Solicitation for 6061 T6511 Aluminum Bar Rounds at Watervliet Arsenal

The U.S. Army Contracting Command at Watervliet Arsenal is soliciting aluminum bar rounds for manufacturing or maintenance needs. - Government Buyer: - U.S. Army, Army Contracting Command – Watervliet Arsenal - Primary contact: Coby Brickner - Products Requested: - Bar Round 6061 T6511 Aluminum Alloy - Three lots: 44, 20, and 15 units - Part number: 11582978RSX - Dimensions: 13.25 inch (+/- 0.15 inch) outside diameter, 8.250 inch (-0.150 inch) inside diameter, 7.75 inch (+0.125 inch) length - Must conform to ASTM B221, ASTM B241/B241M, SAE AMS4150, or ASTM B210 standards - Material certification required - Each article must be marked with specific heat numbers if multiple heats are present in the lot - Notable Requirements: - On-time delivery required within 90 calendar days from award - Compliance with security and quality standards - Submission of CDRL #2 - OEMs and Vendors: - No specific OEMs named; compliance with ASTM and SAE standards is mandatory - Place of Performance and Delivery: - Watervliet Arsenal, 1 Buffington St, Watervliet, NY 12189-4050 (including Bldg 35 for delivery)

Description

44 Each - BAR ROUND 6061 T6511 ALUMINUM ALLOY PER ASTM B221 OR ASTM B241/B241M OR 6061 T6 PER SAE AMS4150 OR ASTM B210, 13.25 INCH +/- .15 INCH OUTSIDE DIAMETER, 8.250 INCH - .150 INCH INSIDE DIAMETER X 7.75 INCH + .125 INCH LENGTH. MATERIAL CERTIFICATION REQUIRED. YIELD FACTOR 1 PIECE WILL YIELD 1 PART.

NOTE: Contractor must mark specific Heat numbers on each article if material lot contains multiple Heat numbers.

Requires a CDRL #2

20 Each - BAR ROUND 6061 T6511 ALUMINUM ALLOY PER ASTM B221 OR ASTM B241/B241M OR 6061 T6 PER SAE AMS4150 OR ASTM B210, 13.25 INCH +/- .15 INCH OUTSIDE DIAMETER, 8.250 INCH - .150 INCH INSIDE DIAMETER X 7.75 INCH + .125 INCH LENGTH. MATERIAL CERTIFICATION REQUIRED. YIELD FACTOR 1 PIECE WILL YIELD 1 PART.

NOTE: Contractor must mark specific Heat numbers on each article if material lot contains multiple Heat numbers.

Requires a CDRL #2

15 Each - BAR ROUND 6061 T6511 ALUMINUM ALLOY PER ASTM B221 OR ASTM B241/B241M OR 6061 T6 PER SAE AMS4150 OR ASTM B210, 13.25 INCH +/- .15 INCH OUTSIDE DIAMETER, 8.250 INCH - .150 INCH INSIDE DIAMETER X 7.75 INCH + .125 INCH LENGTH. MATERIAL CERTIFICATION REQUIRED. YIELD FACTOR 1 PIECE WILL YIELD 1 PART.

NOTE: Contractor must mark specific Heat numbers on each article if material lot contains multiple Heat numbers.

Requires a CDRL #2

View original listing