Opportunity

Alaska Online Public Notices #IH 26-010

Parking Lot Re-surfacing at Fairbanks Hunter Education Indoor Shooting Range, Alaska

Posted

April 01, 2026

Respond By

April 15, 2026

Identifier

IH 26-010

NAICS

238990, 237310

This solicitation seeks contractors for parking lot re-surfacing at the Fairbanks Hunter Education Indoor Shooting Range in Fairbanks, Alaska. - Government Buyer: - State of Alaska Department of Fish and Game (ADF&G) - Procurement officer: Kerry Savereide - Products and Materials Requested: - Crack sealant: Crafco Roadsaver 522 or equivalent (approx. 1,500 linear feet) - Asphalt sealcoat: GSB-78 or equivalent (approx. 27,000 sq ft) - High-quality traffic marking paint (DOT specification, fast-dry) for 35 parking spaces, including 2 ADA-compliant spaces - Services Requested: - Cleaning, patching, and preparation of asphalt surfaces - Crack sealing (base bid up to 1,500 linear feet; bidders to provide cost for each additional 10 linear feet) - Asphalt sealcoating - Painting and striping of parking lot, including ADA-compliant markings - Unique or Notable Requirements: - All work must comply with industry standards and ADA requirements - Contractor must coordinate with ADF&G to minimize facility impact and schedule work - Insurance required: Workers' Compensation, General Liability, and Automobile - No bonding required unless project exceeds $100,000 - Electronic bid submission preferred - OEMs: - Crafco (Crafco Roadsaver 522) - GSB-78 (asphalt sealcoat brand) - Equivalent products are acceptable; no mandatory sole-source - Estimated Project Value: - Under $10,000 to $50,000 - Place of Performance: - Fairbanks Hunter Education Indoor Shooting Range, 1501 College Road, Fairbanks, AK 99701

Description

The State of Alaska Department of Fish and Game is soliciting bids for re-surfacing the parking lot at the Fairbanks Rifle Range. The work includes cleaning, patching, crack sealing, sealcoating, and painting/striping of approximately 27,000 square feet of asphalted areas. The project requires coordination with ADF&G to minimize impact on facility use and must be completed by June 30, 2026. Bidders must submit quotes by April 15, 2026, with electronic submission preferred.

View original listing