SAM #A26-044

The 76th Aircraft Maintenance Group (AMXG) at Tinker Air Force Base, part of the Air Force Sustainment Center (AFSC) under Air Force Materiel Command, is seeking specialized paint equipment for aircraft maintenance operations. - Government Buyer: - Air Force Sustainment Center (AFSC), 76th Aircraft Maintenance Group (AMXG) - Contracting office: FA8125 AFSC PZIMA, Tinker AFB - OEM Highlight: - Graco is the specified Original Equipment Manufacturer (OEM) - Products Requested: - Twelve (12) Graco H85T10 ProXP85 Electrostatic air assisted airless manual paint guns - Part number: H85T10 - Each includes a 613 spray tip, internal power supply rated for 85kV, and a 100 mesh inline fluid filter - Key Technical and Safety Requirements: - Paint guns must be new and rated for 85kV - Fully compatible with existing Graco paint systems at the facility - FM rated for use in Class I, Div. I Hazardous locations (Group D materials) or intrinsically safe - Must support high solid, epoxy, and polyurethane coatings, including MIL-PRF-23377 epoxy primers and MIL-PRF-85285 polyurethane topcoats - 1/4 inch fluid and air inlets (left-handed male NPSM for air, male NPSM for fluid) - Place of Performance and Delivery: - Tinker Air Force Base, Oklahoma - Contracting office located at 3001 STAFF DR STE 2S76, Tinker AFB, OK 73145-3303

The 76th Aircraft Maintenance Group (AMXG) is requesting utilization of funds for thepurchase of twelve (12) Graco H85T10 ProXP85 Electrostatic air assisted airless manual PaintGuns with 613 tips.

1.The requested equipment item descriptions/specifications are outlined below.         a.Paint guns shall be new Graco ProXP85 model H85T10 air assisted airless electrostaticmanual paint guns. •Model Number: H85T10 •Quantity: Twelve (12) •Must be a high-pressure electrostatic spray gun rated for 85kV. •Must be 100% compatible with the facility's existing Graco paint systems. •Paint guns shall include an internal power supply rated for 85 kV and feature a StandardDisplay. •Paint guns shall be FM rated for use in Class I, Div. I Hazardous locations using group Dmaterials or be intrinsically safe. •Paint guns shall be compatible with high solid, epoxy, and polyurethane coatings,including MIL-PRF-23377 epoxy primers and MIL-PRF-85285 polyurethane topcoats. •Paint gun shall have 1/4 inch fluid and air inlets to connect to existing paint cart systems.The air inlet shall be left handed male       NPSM and the fluid inlet shall be male NPSM. •Paint gun shall be provided with a 613 spray tip. •Paint gun fluid line shall have a 100 mesh inline fluid filter.