# SAM #FA446027Q0004

Air Force Roof Snow and Ice Retention System for Building 618

**Buyer:** Fa4460 19 Cons Pka
**Posted:** November 20, 2026
**Respond By:** November 27, 2026
**Identifier:** FA446027Q0004
**NAICS:** 332322

The Department of the Air Force is seeking a complete roof snow and ice retention system for Building 618 at Little Rock Air Force Base.
- **Government buyer:** Department of the Air Force, Air Mobility Command, 19th Contracting Squadron, Little Rock Air Force Base.
- **Scope:** Provide at least 720 linear feet of continuous snow and ice retention coverage for a vertical standing-seam metal roof.
- **System requirements:** Use non-penetrating stainless-steel seam clamps, aluminum rails, and aluminum ice stoppers; include thermal expansion capability and a project-specific layout and bill of materials.
- **Notable performance requirement:** Document clamp capacity of at least 1,500 pounds. No OEM, vendor, or part number is specified.
- **Requested components:** 120 rail sections, 600 seam clamps, 1,200 set screws, 960 ice stoppers, 750 self-drilling fasteners, 120 expansion splices, and 15 installation bits.

### Description

<p>This acquisition is a new requirement for the procurement of an engineered, continuous pipe or fence-style rail snow retention system for facility roof installation.&nbsp;</p>

<p>System Configuration: Must be a continuous horizontal pipe- or fence-style rail snow retention system capable of bridging across structural roof panels and providing continuous longitudinal perimeter retention.<br />
&nbsp;<br />
Retention Capacity &amp; Coverage: System must furnish 720 linear feet of continuous perimeter retention coverage.<br />
&nbsp;<br />
Substrate Compatibility: Mounting clamps and hardware must be fully compatible with the host metal roofing profile (e.g., standing seam or exposed fastener). Attachment systems for standing-seam profiles must utilize non-penetrating clamping mechanisms to preserve the weather-tight integrity and manufacturer warranty of the roof panels.<br />
&nbsp;<br />
Structural Performance Thresholds:<br />
&nbsp;<br />
System components (brackets, clamps, rails, and fasteners) must be engineered and rated to resist site-specific snowpack and ice accumulation shear loads without permanent mechanical deflection.<br />
&nbsp;<br />
Clamp-to-seam holding strength must meet or exceed minimum structural thresholds (e.g., capable of sustaining design loads up to 500 lbs per clamp or linear foot minimum, adjusted to site-specific engineering design calculations).<br />
&nbsp;<br />
Fastening hardware must utilize round-point or non-cutting setscrew designs (e.g., 300-series stainless steel per ASTM F880) to prevent piercing, galling, or compromising protective coatings on metal roof seams.</p>

[View original listing](https://sam.gov/opp/3a51490b15f34443a76821f3b67e10df/view)
