# SAM #W519TC-27-Q-SEAL

Grove YB7720XL Crane Seal Renewal and Inspection Services

**Buyer:** W6QK ACC-RI
**Posted:** November 17, 2026
**Respond By:** November 23, 2026
**Identifier:** W519TC-27-Q-SEAL
**NAICS:** 811310

The U.S. Army is seeking telescope-cylinder seal renewal and inspection services for a Grove YB7720XL crane at McAlester Army Ammunition Plant.
- Government buyer: U.S. Army Contracting Command–Rock Island (W6QK ACC-RI), for McAlester Army Ammunition Plant in McAlester, Oklahoma.
- OEM: **Grove** is identified as the crane manufacturer.
- Requested work: One lot of services covering transportation, disassembly, telescope-cylinder seal renewal, inspection, reassembly, calibration, and an annual crane inspection and load test.
- Requirements: Work is to be performed as soon as possible; further work details are referenced in the statement of work. The solicitation is identified as sole-source.
- No part numbers, separate service provider, or contract value are specified.

### Description

<p>This is a combined synopsis/solicitation&nbsp;for&nbsp;commercial products prepared in accordance with the format in&nbsp;Federal Acquisition Regulation (FAR) RFO 12.2, as supplemented with additional information included in this notice. This announcement constitutes a solicitation only. Proposals are being requested and a formal&nbsp;solicitation&nbsp;will NOT be issued. This acquisition is being issued as sole source to Kirby Smith Machinery.</p>

<p>This is a Request for Proposal (RFP) using FAR RFO 12, Acquisition of Commercial Items; the Solicitation Number is W519TC27QSEAL for Renewal Seals &ndash; Telescope Cylinders of the YB7720XL Grove Crane.</p>

<p>The incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01. The pertaining FAR RFO and Defense FAR Supplement (DFARS) provisions/ clauses apply to this RFQ and resulting award and are found in Attachment 0004 &ndash; Provisions and Clauses.</p>

<p>The NAICS code for this procurement is 811310 (Commercial &amp; Industrial Machinery &amp; Equipment &ndash; except Automotive &amp; Electronic &ndash; Repair &amp; Maintenance. The small business size standard for this NAICS is $21.5 million. The Product Service Code is J039 (Industrial Products Install/ Maintenance/ Repair)</p>

<p>Offeror must be registered within the System for Award Management (SAM) databased at time of response to this solicitation.&nbsp; The website for SAM is https://www.sam.gov/.</p>

<p><strong><u>ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS &ndash; COMMERCIAL</u></strong></p>

<p></p>

<p><strong>DESCRIPTION OF REQUIREMENT</strong></p>

<p><u>CLIN 0001: Renew Seals - Telescope Cylinders</u></p>

<p>Quantity: 1 Lot</p>

<p></p>

<p><strong>NOTE: </strong>1 Lot = Transportation, disassembly, inspection, reassembly, calibration and annual crane inspection/ load test as detailed in Attachment 0001. See Attachment 0001 &ndash; Statement of Work; dated 16 NOV2026, for more information.</p>

<p></p>

<p><strong>TYPE OF ACQUISITION AND CONTRACT</strong></p>

<p>This acquisition is issued as sole source Firm Fixed Price Purchase Order to Kirby Smith Machinery.</p>

<p><strong>DELIVERY AND LOCATION</strong></p>

<p><u>CLIN</u>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <u>Description</u>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <u>Delivery Date</u></p>

<p>0001&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Renew Seals &ndash; Telescope Cylinders&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; As soon as possible</p>

<p></p>

<p>Delivery will be FOB Destination at the following:</p>

<p></p>

<p>McAlester Army Ammunition Plant</p>

<p>Warehouse 8 &ndash; Receiving Office</p>

<p>1 C Tree Road</p>

<p>McAlester, OK 74501</p>

<p></p>

<p><strong>MCALESTER ARMY AMMUNITION PLANT DELIVERY INSTRUCTIONS</strong></p>

<p>MCAAP Deliveries Receiving Hours &amp; Location Truck shipments are accepted at the McAlester Army Ammunition Plant (MCAAP) at Warehouse 8, Receiving Office. The hours for delivery are Monday through Thursday from 6:30 A.M. - 3:00 P.M. All delivery vehicles must arrive at the main truck gate by 3:00 P.M. Deliveries will not be accepted after this time unless prior arrangements have been made. Failure to follow the protocol stated herein and/or obtain a scheduled delivery time prior to delivery may result in the truck being turned away.</p>

<p></p>

<p>For deliveries scheduled on Thursday afternoons during May and June, the vendor must call 918-420-6695 in advance to verify that the receiving office is accepting deliveries on that specific day.</p>

<p></p>

<p>No shipments will be accepted on government holidays. If a holiday falls on a Friday or Saturday, it will be observed on the preceding Thursday. If a holiday falls on a Sunday, it will be observed on the following Monday. The following holidays will be observed:</p>

<p></p>

<p><u>2025 &ndash; 2026 HOLIDAY SCHEDULE</u></p>

<p>Thursday, December 25, 2025 Christmas Day</p>

<p>Thursday, January 01, 2026 New Year&#39;s Day</p>

<p>Monday, January 19, 2026 Martin Luther King, Jr. Day</p>

<p>Monday, February 16, 2026 Washington&#39;s Birthday</p>

<p>Monday, May 25, 2026 Memorial Day</p>

<p>Friday, June 19, 2026 Juneteenth National Independence Day</p>

<p>Thursday, July 02, 2026 Independence Day (Observed)</p>

<p>Monday, September 07, 2026 Labor Day</p>

<p>Monday, October 12, 2026 Columbus Day</p>

<p>Wednesday, November 11, 2026 Veterans Day</p>

<p>Thursday, November 26, 2026 Thanksgiving Day</p>

<p>Friday, December 25, 2026 Christmas Day</p>

<p></p>

<p><u>DRIVER &amp; VEHICLE ENTRY REQUIREMENTS</u></p>

<p>Effective 20 January 2026, in accordance with the Real ID Act set prescribed minimum- security standards, anyone accessing any secure federal or military installation requires a Real ID compliant identification or any other acceptable form of identification.</p>

<p></p>

<p>For access to McAlester Army Ammunition Plant, please include the following:</p>

<p>Real ID &ndash; compliant identification</p>

<p>DoD/ Federal Personal Identity Verification (PIV) Card</p>

<p>U.S. Passport (Book or Card)</p>

<p>Visitors requesting access without a Real ID &ndash; compliant credential or acceptable alternative will be denied access.</p>

<p></p>

<p><strong>PROPOSAL SUBMISSION REQUIREMENTS</strong></p>

<p>Offerors shall submit the following in response to this solicitation:</p>

<ol>
	<li>Price &ndash; Offerors must submit Completed Pricing Sheet at Attachment 0003. All yellow-highlighted sections shall be completed. Prices shall be stated to 2 decimal places.</li>
</ol>

<p></p>

<p></p>

<p><strong>USE OF ARTIFICIAL INTELLIGENCE (AI) TOOLS IN PROPOSAL EVALUATION</strong></p>

<p>Use of Al tools in Support of Evaluations: The Government may employ Al as a tool to assist in<br />
the analysis and review of offeror proposals. Al tools may be used to support tasks such as<br />
summarizing proposal content, identifying compliance with request for task order proposal/<br />
solicitation requirements, and highlighting areas of potential strength, weakness, or risk.</p>

<p><br />
Maintaining Inherently Governmental Functions: Notwithstanding the use of Al tools to support<br />
the evaluation process, all final evaluation judgements, including the assignment or assessment of<br />
adjectival ratings, best value determinations, and source selection decisions, will be made<br />
exclusively by duly appointed Government personnel. The Government retains sole responsibility<br />
for all inherently governmental functions and will not delegate decision making authority to any Al<br />
tool.</p>

<p><br />
Offeror Confidentiality and Data Protection: The Al tools utilized by the Government will be<br />
employed in a manner consistent with applicable regulations that govern the protection of<br />
proprietary and source selection sensitive information. The Al tool will be an output-only system.<br />
Any generated report data is not saved. No proposal data will be transmitted to or processed by<br />
external, non-Government systems without appropriate safeguards and authorizations in place.</p>

<p></p>

<p><strong>BASIS FOR AWARD</strong></p>

<p>The Government will award a single delivery order to the quoter that is deemed responsible and compliant with all the requirements of this solicitation.</p>

<p></p>

<p>Total Price is calculated as the sum of all CLINs added together.</p>

<p></p>

<p>In accordance with FAR RFO 52.212-1(d), the Government intends to award a contract against this solicitation without discussions.</p>

<p></p>

<p><strong>LISTING OF ATTACHMENTS</strong></p>

<p>Attachment 0001 &ndash; Statement of Work Renew Seals; 16NOV2026</p>

<p>Attachment 0002 &ndash; WD No. 2015-5333 Revision 32; dtd 21 August 2026</p>

<p>Attachment 0003 &ndash; Price Sheet; 16OCT2026</p>

<p>Attachment 0004 &ndash; Provisions and Clauses</p>

<p></p>

<p><strong>DEADLINE FOR SUBMISSION</strong></p>

<p>Offers are due on 23 November 2026 no later than 12:30 PM Central Time.</p>

<p></p>

<p>Offers shall be submitted in the following way:</p>

<p></p>

<p>Electronically via email to the Contract Specialist, Bridget Garnica, bridget.m.garnica.civ@army.mil and Contracting Officer, Darla Lott, darla.a.lott.civ@army.mil.&nbsp; Offerors shall include &ldquo;W519TC27QSEAL Response &ndash; [Insert Offeror&rsquo;s Name]&rdquo; within the Subject line.</p>

<p></p>

<p><strong>QUESTIONS</strong></p>

<p>Questions shall be submitted in the same manner as Offers, electronically via email to the Contract Specialist and Contracting Officer listed above.</p>

<p></p>

<p><strong>**Note:</strong> Interested offerors must submit any questions concerning this solicitation at the earliest time possible, to enable the Buyer to respond.&nbsp; Questions not received 72 hours prior to the closure of the solicitation may not be considered.</p>

<p><strong>End of Addendum 52.212-1</strong></p>

[View original listing](https://sam.gov/opp/44bed9dc90ba4628a8c48c4c38241cd2/view)
