# Federal Register #2026-23309

MSHA Review of Coeur Alaska’s Blasting-Line Safety Modification Petition

**Buyer:** U.S. Department of Labor, Mine Safety and Health Administration (MSHA)
**Posted:** November 17, 2026
**Respond By:** December 17, 2026
**Identifier:** 2026-23309

MSHA is reviewing a safety-standard modification petition for blasting practices at the Kensington Mine in Juneau, Alaska.
- **Government agency:** U.S. Department of Labor, Mine Safety and Health Administration (MSHA); specific office not identified.
- **Petitioner and mine operator:** Coeur Alaska Inc., for Kensington Mine.
- **Request:** Modify 30 CFR 57.6603, which requires a 15-foot separation between electric power lines and blasting lines, to allow an alternative in underground areas where mine dimensions make that separation impractical.
- **Systems and companies named:** NONEL shock tube and electronic detonator initiation systems; **Dyno Nobel**, including Driftshot electronic starters; and Detnet, whose testing and installation recommendations are referenced.
- **Proposed safeguards:** Inspect shock tubes; organize and secure blasting circuits; separate blast lines from live electrical cables in line with manufacturer guidance; maintain and insulate power lines; follow safe-blasting and misfire procedures; and train personnel. Electric detonators would require leadership approval.
- **Procurement status:** This is a regulatory petition for public comment, not a request to purchase products or services. No quantities, product line items, or performance period are specified.

### Description

MSHA published a notice summarizing a petition for modification submitted by Coeur Alaska Inc. for the Kensington Mine in Juneau, Alaska. The petition seeks to modify the application of 30 CFR 57.6603, concerning the required 15-foot air gap between electric power lines and blasting lines, to allow an alternative method using NONEL shock tube and electronic detonator initiation systems. The proposed measures include inspections, specified separation and installation practices, safe-blasting procedures, and training. Comments were due by December 17, 2026.

[View original listing](https://www.federalregister.gov/documents/2026/11/17/2026-23309/petition-for-modification-of-application-of-existing-mandatory-safety-standards)
