# Federal Register #FAA-2026-13817

FAA proposal for repetitive Daher/SOCATA TBM 700 main landing gear inspections

**Buyer:** Federal Aviation Administration (FAA), U.S. Department of Transportation
**Posted:** November 17, 2026
**Respond By:** January 04, 2027
**Identifier:** FAA-2026-13817

The FAA proposes updated airworthiness requirements for certain Daher/SOCATA TBM 700 aircraft, not a purchase or contract award.
- **Government buyer:** U.S. Department of Transportation, Federal Aviation Administration (FAA); no specific office is identified.
- **OEMs and named organizations:** **Daher Aircraft, SAS** is the aircraft manufacturer named in the proposal. Other named OEM/service-information entities include **Daher Aerospace**, **Daher-Socata**, **EADS-Socata**, and **SOCATA**. The European Union Aviation Safety Agency (EASA) is also referenced as an aviation safety authority.
- **Affected equipment:** Main landing gear (MLG) forging bodies, part numbers 21236-000-00, 21236-000-01, 22609-000-00, 22609-001-00, 22611-000-00, 22611-001-00, D67685, and D67686. No purchase quantities are specified; the FAA estimates 431 U.S.-registered aircraft could be affected.
- **Proposed compliance requirements:** Perform repetitive crack inspections using eddy current or fluorescent penetrant methods, at intervals no greater than 240 landings. Dye penetrant is not permitted for these repetitive inspections.
  - If a crack is suspected or found, remove the landing gear leg and perform fluorescent penetrant inspection before further flight.
  - Confirmed cracks require replacement or an approved repair, with applicable follow-on actions, before further flight.
  - Installing serviceable parts in both left- and right-hand MLGs is terminating action for the repetitive inspections.
- **Service information:** The proposal references Daher Mandatory Service Bulletin 70-130, including applicable revisions.
- **Procurement status:** This is a proposed airworthiness directive, not a solicitation or award; no contract value or purchase quantity is provided.

### Description

The FAA proposes to supersede Airworthiness Directive 2015-17-10, which applies to certain Daher Aircraft, SAS Model TBM 700 airplanes. The existing directive requires repetitive inspections of main landing gear forging bodies for cracks and corrective actions based on findings. The proposed directive continues those requirements, adds additional serviceable landing gear parts, and removes dye penetrant as an authorized inspection method. Comments are due January 4, 2027.

[View original listing](https://www.federalregister.gov/documents/2026/11/17/2026-23372/airworthiness-directives-daher-aircraft-sas)
