# SAM #70Z02427QBOST001

Coast Guard seeks commissioning and combustion services for 11 Weil-McLain boilers

**Buyer:** USCG Base Boston
**Posted:** November 02, 2026
**Respond By:** November 13, 2026
**Identifier:** 70Z02427QBOST001
**NAICS:** 238220

The U.S. Coast Guard is seeking service work for boilers at Station Eaton’s Neck in Northport, New York.
- **Government buyer:** U.S. Department of Homeland Security, U.S. Coast Guard; U.S. Coast Guard Sector Long Island Sound (P&C), with Base Boston identified in the opportunity.
- **OEM:** **Weil-McLain** equipment is covered: 11 EVG 299 boilers, rated at 280,000 BTU each, and 11 AQUA PLUS-55-S2 hot water storage tanks.
- **Requested services:** Combustion analysis, calibration, and commissioning for all 11 boilers. Work includes low- and high-fire testing; inspection and adjustment of combustion and gas-valve settings; checks of venting, burner operation, ignition, modulation, flame signal, safety controls, and fault monitoring; and recording pre- and post-adjustment readings.
- Return each boiler to normal operating condition and document any repairs needed beyond the service scope.
- Coordinate work with the Coast Guard representative; perform work during normal daylight hours unless otherwise approved, with advance notice for scheduling.

### Description

<p>THE TIMELINE FOR VISIT WILL BE 11/3/26-11/6/2026, 11/9/2026-11/10/2026 8AM- 3PM EST.&nbsp;SITE VISITS: MUST BE COORDINATED WITH&nbsp;DC1 MICHAEL BUSH VIA PHONE 934-235-0487.</p>

<p>This project consists of combustion analysis, calibration, and commissioning services for eleven (11) boilers at the U.S. Coast Guard housing area at Station Eaton&rsquo;s Neck.(12 Lighthouse Rd, Northport, NY 11768)</p>

<p>Each housing unit contains the following equipment covered under this agreement:</p>

<ul>
	<li>Boiler: Weil-McLain EVG 299 (280,000 BTU)</li>
	<li>Hot Water Storage Tank: Weil-McLain AQUA PLUS &ndash; 55 &ndash; S2</li>
</ul>

<p>The purpose of this requirement is to verify and adjust boiler combustion settings in accordance with applicable manufacturer specifications; support safe, efficient, and reliable boiler operation; and document any equipment conditions requiring work beyond the scope of combustion calibration and commissioning.</p>

[View original listing](https://sam.gov/opp/156ed7b92043463187dd5006a73bf74b/view)