# SAM #SPMYM227Q0193 DLA Puget Sound Request for Crosby IPU10 Plate Clamps and Equivalent Vertical Lifting Clamps **Buyer:** DLA Maritime Puget Sound **Posted:** October 27, 2026 **Respond By:** October 28, 2026 **Identifier:** SPMYM227Q0193 **NAICS:** 333923, 423710 DLA Maritime – Puget Sound is seeking quotes for Crosby plate clamps and equivalent vertical lifting clamps for shipyard use. - **Buyer:** Defense Logistics Agency (DLA), DLA Maritime – Puget Sound, Contracting Division (DLA-PME); the solicitation identifies Donna Todd. - **OEM:** **Crosby** is the named manufacturer for the five solicited CLINs. Offers of equivalent products must include manufacturer specifications. The manufacturer for the five JML DOC-numbered clamp specifications is not identified. - **Crosby clamp quantities:** 18 total clamps across five CLINs: - 4 x 2-ton IPU10 universal lifting clamps, part number 2701677; seller part number PCIPU102T. - 4 x 4.5-ton IPU10 universal lifting clamps, part number 2701677; seller part number PCIPU104.5T. - 4 x 1-ton IPU10 universal lifting clamps, part number 2701663; seller part number PCIPU1T. - 4 x 2-ton IPU10 universal lifting clamps with auto-close, part number 2701629; seller part number 2701629NS. - 2 x 1-ton IPU10 automatic universal clamps, part number 2701628; seller part number 2701628NS. - **Additional specified clamps:** Five vertical lifting clamps are listed by JML DOC number, with quantities not stated: 62930164 (4,000 lb), 62940155 (9,000 lb), 62940156 (2,000 lb), 62940157 (4,000 lb), and 62940158 (1,000 lb). Each must turn 180 degrees, have a latch for pre-tensioning and retention, carry permanent brand/model, working-load-limit and unique-serial-number markings, and meet ASME B30.20. DOC 62940157 and 62940158 also require automatic click-and-grip contact with steel plates. Jaw openings and dimensions are detailed in the product line items. - **Delivery and quote requirements:** Delivery to Puget Sound Naval Shipyard is requested by March 2027. Quotes are to include pricing, FOB Destination terms, delivery lead time, manufacturer name and address, country of manufacture, and part number. Applicable awardees must meet NIST SP 800-171 assessment requirements; qualifying commercial off-the-shelf items are exempt. - The solicitation is a total small-business set-aside and contemplates one award covering all items. ### Description

Please be advised that all communications regarding this requirement are governed by the Procurement Integrity Act. In accordance with FAR 3.104, no proprietary bid information, pricing data, or source selection-sensitive metrics may be exchanged or solicited outside of authorized contracting channels. Thank you for your cooperation in maintaining a fair and ethical procurement process.

FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL OR FAX. ENSURE YOU CHECK APPLICABLE BOXES IN CLAUSE 52.204-24 (2)(d) (1) and (2) AND THAT YOU HAVE COMPLETED ITEMS 1 THROUGH 10 NOTED BELOW.

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV

ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.

To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)

**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period**

  Please read the contract in its entirety.

  If you are able to provide a quote be sure to provide the following information in the sections provided below:

  1. Page 1 BLK 17a. Provide Contractor's info and cage code.
  2. Page 1 -  Read box 28 and sign boxes 30 a, b, and c.
  3. Section A. A1 – 1. Enter The Contractor's POC
  4. Section B. – Enter your Quote and any other info we should know.
  5. Please quote FOB Destination
  6. Section K. K21 – Check the appropriate box and provide the Manufacturer’s Name__________, Address_______ and the Country of Manufacturing________ and part number_________.
  7. Section F. –  Provide the Lead Time and/or Delivery Date.
  8. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes
  1. Section K.- 52.212-3(b)-(p) Check the applicable boxes
  1. Return the signed and filled out solicitation with your quote by the due date listed.

FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.

EMAIL: donna.todd@dla.mil

PHONE: 385-591-1057

[View original listing](https://sam.gov/opp/735aef566d604a70ad1f4325e5eabe98/view)