# SAM #1240LP27SS0001 USFS Market Research for 45 Custom Outdoor-Rated Display Enclosures **Buyer:** USFS Intermountain Region CSA 4 **Posted:** October 27, 2026 **Respond By:** November 06, 2026 **Identifier:** 1240LP27SS0001 **NAICS:** 332119, 332439, 332322, 337215 The U.S. Forest Service is gathering market information on 45 custom weather-resistant enclosures for electronic displays. - **Government buyer:** U.S. Department of Agriculture, Forest Service, USDA-FS, CSA Intermountain 4. - **Procurement status:** Request for Information (RFI) for market research and planning; it is not a solicitation or a commitment to purchase. - **OEMs and vendors:** No manufacturers, OEMs, or vendors are named in the notice. - **Requested product:** 45 custom outdoor-rated steel equipment enclosures for customer-provided six-character electronic display units. - Enclosure dimensions: approximately 14 in. high × 36 in. long × 12 in. deep; display dimensions: approximately 11 in. high × 33 in. long × 4 in. deep. - Construction equivalent to 14-gauge steel, painted inside and outside, with sealed protection equivalent to NEMA Type 4 or Type 12 for water and weather exposure. - Two rear mounting feet, each with two holes, spaced approximately 34 in. center-to-center. - Removable front cover that can be secured on top as a wind-stable sunshade, plus a removable interior panel for mounting the display. - **Information sought:** Vendor capabilities, technical feedback, nonbinding pricing for 45 units, estimated production and delivery lead times, and commercially available products that could meet or be modified to meet the requirements. - **Value:** The notice does not provide a budget or price. A rough planning estimate for the 45 custom enclosures is $22,500–$67,500. ### Description

REQUEST FOR INFORMATION (RFI)
Subject: Market Research – Custom Outdoor-Rated Equipment Enclosures
Agency: U.S. Forest Service
Type: Sources Sought / Request for Information (RFI)
Purpose: This RFI is issued solely for information and planning purposes. This is not a solicitation and does not commit the Government to any future acquisition.

1. INTRODUCTION
The U.S. Forest Service is conducting market research to identify capable vendors able to design, manufacture, and deliver custom outdoor-rated steel enclosures for electronic display equipment. The Government seeks industry input regarding capability, production lead times, materials, standards compliance, and potential manufacturing considerations.

2. BACKGROUND
The Forest Service requires 45 custom enclosures designed to house a six-character outdoor digital display unit. These enclosures must protect the device from weather, impact, and environmental exposure while providing specific mounting and sun‑shade functionality. All requirements are functional and performance‑based; no proprietary industrial design elements are required or included.

3. OBJECTIVE OF THIS RFI
The Government seeks industry feedback on:
• Capability to manufacture enclosures meeting the dimensional, material, and performance requirements listed below.
• Potential challenges, recommended alternatives, or suggestions to improve manufacturability or durability.
• Estimated pricing ranges for planning purposes (not binding).
• Estimated production and delivery timelines.
• Identification of any commercially available products that meet or could be modified to meet the requirements.

4. FUNCTIONAL REQUIREMENTS (SUMMARY)
Vendors responding to this RFI should describe their ability to meet the following performance‑based requirements:

4.1 Enclosure Function
• Outdoor‑rated steel enclosure similar in function to an industrial wireway or gutter box.
• Must accommodate a display unit measuring approximately 11″H × 33″L × 4″D.
• Provide weather resistance and structural protection in an outdoor environment.

4.2 Approximate Enclosure Dimensions
• Exterior dimensions around 14″H × 36″L × 12″D.

4.3 Construction Requirements
• Material equivalent to 14‑gauge steel, painted interior and exterior.
• Environmental rating equivalent to NEMA Type 4 or 12.
• Fully sealed to prevent water and weather intrusion.

4.4 Mounting Features
• Two rear mounting feet, each with two mounting holes.
• Mounting hole spacing approximately 34 inches center‑to‑center.

4.5 Cover Design and Sun‑Shade Functionality
• Removable front cover that can be mechanically secured on top of the enclosure to act as a sunshade.
• Shade cover must remain stable in typical outdoor wind conditions.
• Features such as studs, collars, clamps, or similar mechanical retention systems are acceptable—vendors may propose alternatives.

4.6 Interior Mounting Panel
• Removable panel suitable for mounting the customer‑provided electronic display.

5. VENDOR RESPONSE REQUESTED
Interested vendors are invited to submit the following information:

  1. Company Information:
    • Name, address, point of contact, DUNS/UEI, small business status.
  2. Capability Statement:
    • Description of relevant manufacturing experience.
    • Ability to meet or exceed the functional requirements listed above.
  3. Technical Feedback:
    • Any potential challenges with the requirements.
    • Recommendations to reduce cost or improve durability while maintaining function.
  4. Rough Order of Magnitude (ROM) Pricing:
    • Non-binding estimate for a quantity of 45 units.
  5. Estimated Lead Time:
    • Production timeline from receipt of specifications to delivery.
  6. Product Literature or Photos (if applicable):
    • Examples of similar enclosures previously manufactured.

6. RESPONSE INSTRUCTIONS
Responses should be submitted electronically in PDF or Word format.
This RFI is solely for market research; submission does not guarantee future solicitation or contract award.

7. DISCLAIMER
This RFI does not constitute a solicitation and shall not be construed as a commitment by the Government. All information received is strictly voluntary and will be used for planning purposes only.

VENDOR RESPONSE FORM
Request for Information (RFI): Custom Outdoor-Rated Equipment Enclosures

Section 1 – Vendor Information

  1. Company Name: ______________________________________________
  2. Address: _____________________________________________________
  3. Point of Contact (Name & Title): _______________________________
  4. Email: ____________________________ Phone: ____________________
  5. UEI / DUNS Number: __________________________________________
  6. Business Size (check all that apply):
    • ☐ Large Business
    • ☐ Small Business
    • ☐ HUBZone
    • ☐ Woman-Owned
    • ☐ Veteran-Owned / SDVOSB
    • ☐ Other: _________________________________________________

Section 2 – Capability Statement

  1. Describe your company’s capability to manufacture outdoor-rated enclosures meeting the performance requirements summarized in the RFI:
  1. Provide examples of similar work or relevant past performance:

Section 3 – Technical Feedback

  1. Identify any requirements that may present challenges or require clarification:
  1. Recommend any alternative materials, mounting features, or design approaches that may improve durability, cost efficiency, or manufacturability:

Section 4 – Estimated Pricing (ROM – Non‑Binding)
Provide an estimated cost range for manufacturing a quantity of 45 enclosures.
• Unit Price Estimate: ___________________________________________
• Total Estimate: _______________________________________________

Section 5 – Production Lead Time
Please provide estimated timelines for:
• Prototype or sample unit (if applicable): ________________________
• Full production: ______________________________________________
• Delivery of all units: __________________________________________

Section 6 – Additional Information
Include any product brochures, enclosure photos, technical drawings, or configuration options related to similar enclosures your company provides.

Section 7 – Certification
I certify that the information provided in this response is accurate to the best of my knowledge.

Name: ___________________________ Title: _______________________
Signature (if applicable): _____________________ Date: ___________

[View original listing](https://sam.gov/opp/8d0e6516010e45cc9fc7597ccdbc7c86/view)