# SAM #FA480027Q0005

Air Force market research for a hexavalent-chromium-control aircraft sanding booth

**Buyer:** 480th Fighter Squadron
**Posted:** October 27, 2026
**Respond By:** November 13, 2026
**Identifier:** FA480027Q0005
**NAICS:** 332312, 333413

The Department of the Air Force is gathering industry feedback on a self-contained sanding booth for aircraft-component work at Langley AFB.
- **Government buyer:** Department of the Air Force; Air Combat Command; 1st Fighter Wing. The 633rd Contracting Squadron (633rd CONS/PKA) is conducting the market research; 1 FW/PIO is also identified in the requirements.
- **Procurement status:** This is a request for information and draft-requirements feedback, not a solicitation or award.
- **Product requested:** One Environmental Control Work Booth/Sanding Booth, model DB-22-24-2x15C, measuring 22 ft W × 8 ft D × 8 ft H. No manufacturer or OEM is identified in the provided materials.
- **Key requirements:** Self-contained, deployable booth for aircraft-component sanding and preparation; capture hexavalent-chromium particulate; recirculate filtered air; provide 99.97% HEPA safety afterfilters and cartridge filtration; and integrate with facility-provided 600V power, fire-suppression water lines, and direct air lines. The draft specifications also identify two 15 hp motors, blowers rated at 20,000 cfm at 3.25 in. wg tsp, 24 flame-retardant nanofiber cartridge filters, PLC-controlled reverse-pulse-jet cleaning, VFD motor controls, pull-out dust drawers, sound-insulated galvanized-metal containment, six dust-tight LED lights, a HEPA pressure gauge, compressed-air filter/regulator, Regain Air System, high-temperature blower shutoff, and eight sprinkler connections. Fire-system hookup and sprinkler heads are by others.
- **Industry feedback requested:** Comment on the draft requirements, whether a 12–14-week after-receipt-of-order lead time is sufficient, and other considerations relevant to preparing a quote.

### Description

<p>The 633rd Contracting Squadron at Langley Air Force Base is seeking feedback from capable companies and entities that can provide an Environmental Control Work Booth/Sanding Booth in accordance with the specifications outlined in Attachment 1, Statement of Requirements.&nbsp;</p>

<p>There will be a site visit held on<strong> November 3, 2026, at 2:00 PM EST</strong> so you can see where the Sanding Booth must fit within the wall. If you intend to come, please email Kelly Voigts as soon as possible at kelly.voigts.3@us.af.mil.&nbsp;</p>

<p><strong>If you intend to come to the site vusit you must bring OSHA approved hard hats and reflective vests becauase the site visit will be held at an active construction site.&nbsp;</strong></p>

<p>For more information please review the attached SOR and Sources Sought (RFI) documents.&nbsp;</p>

[View original listing](https://sam.gov/opp/de391faffd4f44be930cb0b538aad0c1/view)