# CanadaBuys #W6399-27-SS18

DND procurement of two 2,000-watt fibre laser cleaning machines and associated support

**Posted:** October 21, 2026
**Respond By:** November 23, 2026
**Identifier:** W6399-27-SS18
**NAICS:** 333517, 423830

Canada’s Department of National Defence is seeking a complete, ready-to-operate laser cleaning capability for its maintenance operations.
- **Government buyer:** Government of Canada, Department of National Defence (DND), National Defence Headquarters; procurement contact identified as Ryan Stout, Senior Procurement Officer.
- **OEMs and vendors:** No equipment manufacturer, OEM, reseller, or supplier is named in the solicitation.
- **Equipment requested:** Two 2,000-watt continuous-wave (CW) fibre laser cleaning machines, with no part numbers specified. The machines must clean metal surfaces of rust, scale, corrosion, markings, oil, grease, and similar contaminants without abrasive media.
- **Included safety equipment:** Four laser safety curtains total (at least two per machine, each at least 1.5 m wide by 2 m high), 10 units of wavelength-specific laser eye protection, and 10 respiratory protective devices for non-beam hazards. Required coolant, accessories, auxiliary equipment, and components for full operation are also included.
- **Key technical requirements:** IEC 60825-1 compliance and ETL, CSA, UL, or equivalent certification recognized for use in Canada; at least 15 m cleaning cable; cleaning width of 200 mm ± 40 mm; 200–240 VAC, single-phase, 40 A power; liquid cooling; at least four keyed locks and emergency stops; and a manufacturer’s warranty of at least two years. Supplied circuit breakers must be CSA- and UL-certified.
- **Services and documentation:** Delivery to Petawawa, Ontario, installation, commissioning, testing, and operational acceptance; on-site operation and basic maintenance training for up to 10 DND personnel; and English manuals, warranty and laser-safety documents, technical information, maintenance schedules, and after-sales information. French translations must be provided at no additional cost if available.
- **Notable requirements:** Training is to occur within two weeks after installation. Canadian suppliers are eligible, and environmentally preferable packaging is required.
- **Performance period:** From contract award through the required completion period, estimated at approximately four months; no option periods are specified.

### Description

The Department of National Defence requires the supply, delivery, installation, commissioning, and associated training for two 2,000-watt continuous laser cleaning machines. The equipment must comply with the technical specifications in the Request for Proposal documents. Delivery is required to Petawawa, Ontario, no later than March 31, 2027. The notice states that the procurement is open bidding and selection is based on the lowest price.

[View original listing](https://canadabuys.canada.ca/en/tender-opportunities/tender-notice/cb-623-6596342)