# SAM #FTWMCCG61D653701 GSA seeks equipment and installation for one 2026 Ford F-350 **Buyer:** GSA Federal Acquisition Service **Posted:** October 15, 2026 **Respond By:** October 30, 2026 **Identifier:** FTWMCCG61D653701 **NAICS:** 336211, 811111 GSA Fleet is seeking a vendor to equip and install components on one 2026 Ford F-350. - **Government buyer:** General Services Administration (GSA), Federal Acquisition Service (FAS), Fleet Maintenance Control Center, Fort Worth; on behalf of GSA Fleet. Contact named in the attachment: William Hofmann. - **Named OEMs/brands:** **Ford** (vehicle), **WARN** (winch and related hardware), and **CM** (TM utility body, or equivalent). - **Requested equipment:** WARN 16.5 winch (68801), mounting bracket (108001), carrier (107651), and guard (109580); lighting; cab-length running boards; utility body and storage; removable spare-tire rack and cab-protector screen; Class 5 receiver hitch, recessed bumper, trailer plug, and backup camera. Quantities are generally unspecified; the requirement covers one truck and one installation service. - **Notable specifications:** The utility body must provide roughly 22 inches of ground clearance, two heavy-duty 8-inch slide-out drawers, a 3/16-inch floor deck, compartment lighting, in-floor tie-downs, E-track, a bed liner, and additional top-side storage. Its doors must open upward with struts, and it must not obscure the headache-rack brake lights. The hitch must be rated for at least 18,000 pounds; trailer wiring must meet SAE J2863; the spare-tire rack must be removable to allow cab removal. - **Installation requirements:** Complete work within 120 days after receipt of order. Work must meet industry standards and applicable manufacturer warranties, follow EPA and OSHA requirements, and have required safety documentation available on site. The repair facility must be within 75 miles of Loveland, Colorado; the vendor must maintain appropriate insurance and valid business licenses. ### Description

This requirement is for the installation of necessary components on a 2026 FORD F-350 (Tag number G61D6537 , VIN# 1FD8W3FN9TEE72593). All equipment must be covered by the manufacturer’s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM).
BOM:
60 Inch Cab to Axle Front Winch, Mount, Guard, Lights WARN Winch and Mount -Warn16.5 Winch- WARN PN# WARN 68801 - Winch Mounting Bracket -WARN PN# 108001 -Winch Carrier- WARN PN# 107651 -Winch Guard- WARN PN# 109580 Light Bar LED 2 row light bar -Approximately 20 inches -Wired to upfitter switches LED Amber Strobe -Mounted in front grill and rear of utility bed -Wired to upfitter switch Go light -Mounted on driver side on material rack -Two remotes -LED lights Body mounted work lights -LED light -Mounted at rear of utility bed 
Truck Body Cab length running boards. Utility Body Body- CM brand TM body or equivalent - Spring mounted front mount - Final overall ground clearance to match lowest point on truck cab. Roughly 22 inches. -1 st Front vertical compartment - 2each 8-inch-tall heavy duty slide out drawers -mounted at bottom of bin -3/16 th floor deck -Compartment lights in each bin -Utility Box compartment lighting -In floor Tiedown -E-track -Bed liner -Additional storage boxes on top side of PS and CS of First vertical bin. - Full Length First vertical bin - Full width First vertical bin - Box must not cover headache rack brake lights - Doors must open up for access. - Must be equipped with struts to hold open door - Heavy Duty Spare Tire Rack and Cab protector screen -Rack must be removable to facilitate vehicle cab removal. Hitch and Bumper -Class 5 receiver hitch Rated at no less the 18,000lbs -Recessed bumper -Trailer Electrical plug wired to SAE J2863 standard - Back up camera -Centrally located and protected rear view camera mount

[View original listing](https://sam.gov/opp/81c2095f52dc40cd91c9a397dfb25193/view)