# PIEE #W911S226U4559

Procurement of Splash Shield Partition Room for McAlester Army Ammunition Plant

**Buyer:** MICC-Ft Drum
**Posted:** September 28, 2026
**Respond By:** October 06, 2026
**Identifier:** W911S226U4559
**NAICS:** 337215, 339999

This procurement opportunity is issued by W6QM MICC-FT DRUM for delivery to the McAlester Army Ammunition Plant in Oklahoma.
- Government Buyer:
  - W6QM MICC-FT DRUM (Mission and Installation Contracting Command)
  - Delivery location: McAlester Army Ammunition Plant, Oklahoma
- Products Requested:
  - One splash shield partition room
    - Metal frame tubing: 5 ft x 2 in x 4 in (top/bottom), 16 ft x 2 in x 4 in (curtain areas)
    - Angle-iron frame finished with gray powder coating
    - Two doors with keyed cylinder locks
    - Panels: 1/4-inch-thick clear polycarbonate
    - Overall height: 8 ft 5 in; minimum 4-inch open clearance at bottom (except doors)
    - Panels and doors specified in various widths and heights
    - No ceiling required
    - Material only; no installation requested
- Unique Requirements:
  - Government-furnished items not included: industrial sliding curtains for two openings, strip door for another opening
  - No specific OEMs or vendors are named
- No installation or labor services are requested; only material delivery is required.

### Description

567 Tar Shield Salient Characteristics for Matrix: The contractor shall furnish and deliver one (1) splash shield partition room meeting the following minimum salient characteristics: Metal Frame Tubing: 5 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom. Metal Frame Tubing for Curtain Areas:16 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom.16 ft -0 inches W 2 inches x 4 inches One tube for top and one tube for bottom. No Ceiling with the partition room. Angle-iron frame, finished with gray powder coating. Two doors each to be equipped with a keyed cylinder lock on door. FOR FULL PANELS Overall partition height of 8 feet, 5 inches with minimum 4-inch open clearance on the bottom of all panels except the doors.	Each Panel shall be in width of no more or no less than: 1/4-inch-thick clear polycarbonate.2 ft	0 inches	Panel5 ft	0 inches	Top and Bottom Tube9 ft	0 inches	Panel              10 ft 0 inches	Panel3 ft	7 inches	Door1 ft	9 inches	Panel7 ft	6 inches	Panel	7 ft	0 inches	Panel8 ft	0 inches	Panel             10 ft 0 inches	Panel             10 ft 0 inches	Panel6 ft	0 inches	Panel5 ft	4 inches	Panel              10 ft 0 inches	Panel8 ft	11 inches	Panel3 ft	7 inches	Door	Material shall be delivered to the Government-designated location. Government-furnished / not included:	Industrial sliding curtains for the two Section #6 openings.	Strip door for the Section #9 opening. Purchase only, no install requested. The cited vendor quote identifies the partition as a single room with polycarbonate panels and a door, with the above framing, finish, height, and lock requirements.

[View original listing](https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=W911S226U4559&noticeType=CombinedSynopsisSolicitation)